Dorman - OE Solutions Suspension Control Arm P/N:521-674
Dorman 521-707 front left lower control arm for the 2009-2020 Dodge Journey and other vehicles locates the front left wheel as the suspension moves. This Dorman control arm is a direct replacement that fits and performs like the original equipment on the vehicles it fits.
A clunk over bumps, uneven front tire wear or a cracked or torn bushing can mean the arm is worn. A worn ball joint, a tired strut or a loose tie rod end can cause similar clunks and pulling, so find the cause before you buy. Both front sides are normally replaced together; this listing is one arm, and the front right is a separate part.
The 2009-2020 Dodge Journey, 2008-2014 Dodge Avenger and 2011-2014 Chrysler 200 take this Dorman lower control arm, and so do other vehicles. Open the "Vehicles it fits" section to check your exact model and engine.
Fit and size
Build and materials
One control arm with its bushings; the front left takes one. A ball joint, grease fitting and mounting hardware are not included, so plan on new fasteners rather than reusing the old ones.
Interchange: 4766423AA · 4766423AB · 4766423AC · 4766423AD · 4766423AE · 4766423AF · 68149313AA · 68149313AB · TC3203 · CA12321 · RK643253 · GS25172 · CMS25172 · 2606426 · 2606426M · 5CB25106 · SK521707 · 1506071
This part cross-references / interchanges with the following part numbers:
Is Dorman 521-707 the right 2009-2020 Dodge Journey control arm for the front left lower position?
Yes. Dorman 521-707 is the front left lower control arm for the 2009-2020 Dodge Journey; the right side is a separate part.
Does Dorman 521-707 work as a 2011-2014 Chrysler 200 control arm?
Yes. This front left lower arm fits the 2011-2014 Chrysler 200 as well, and the right side is ordered separately.
What comes with the Dorman suspension control arm 521-707?
Dorman 521-707 comes as one control arm with its rubber bushings. A ball joint, grease fitting and mounting hardware are not included.
What material is the arm itself, and how is it finished?
This front left lower arm is cast iron with a powder-coated finish, and its bushings are rubber. The bushings measure 14.3 mm inside diameter, 39.6 mm outside diameter and 92 mm long.
Which signs can point to a worn lower control arm bushing?
A clunk over bumps, uneven front tire wear or pulling can go with worn bushings. With the engine off, look for cracked or torn rubber or a bent arm; a shop can confirm.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.