Dorman - OE Solutions Suspension Control Arm P/N:522-095
Keep the front wheel on your 2003-2004 Nissan 350Z or 2003-2004 Infiniti G35 properly located with this lower control arm from Dorman - OE Solutions, part number 522-304. It is a direct-fit replacement for the listed applications and is cataloged for the front right lower forward position.
A control arm links the wheel's knuckle to the vehicle's chassis. It lets the wheel travel up and down over the road while holding it in place for steering and alignment. This suspension control arm is precision-engineered and rigorously tested as a dependable stand-in for the original equipment on specific vehicles.
Signs a control arm may need replacing include clunking or knocking over bumps, a vague or wandering feel in the steering, and uneven tire wear. Other worn suspension or steering parts can cause similar symptoms, so diagnose the cause before replacing. When choosing a Dorman control arm, match the position: this one is the front right lower forward arm. A wheel alignment is recommended after installation, and replacing the matching left-side arm at the same time can help keep handling even.
Interchange: 102-6597 · 800-97381 · 622.42845 · 623.42845
1026597 · 80097381 · 62242845 · 62342845 · TC6317 · CA4960 · 2CB30061 · RK641594 · GS30164 · CMS30164 · 2606158 · 54500AL500 · 54500AM600 · 54500AM601 · SK522304
This part cross-references / interchanges with the following part numbers:
Is this 2003-2004 Nissan 350Z lower control arm also listed for the 2003-2004 Infiniti G35?
Yes. It is listed for the 2003-2004 Nissan 350Z and the 2003-2004 Infiniti G35. See the Buyer's Guide tab for full fitment details.
Which position does this control arm install in?
It is cataloged for the front right lower forward position. Before ordering, compare it with the arm you are replacing.
What does a control arm do?
It connects the wheel's knuckle to the chassis. This lets the wheel move over bumps while holding it in position for steering and alignment.
What are signs a control arm may be worn?
Clunking over bumps, wandering steering or uneven tire wear can be signs. Other suspension parts can cause the same symptoms, so diagnose the cause first.
Is an alignment needed after installing it?
Yes, a wheel alignment is recommended after replacing a control arm. Follow the vehicle service information for fastener torque and whether the original fasteners may be reused.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.