Dorman - OE Solutions Suspension Control Arm P/N:522-844
Dorman 522-333 front left lower control arm for the 2000-2006 Audi TT and other vehicles connects the wheel to the chassis and guides suspension movement. Also called a suspension control arm, it is made for the front left side.
A clunk over bumps, pulling to one side, uneven tire wear or torn bushing rubber can mean a control arm has worn. Worn sway bar links, a tired strut or a loose tie rod can produce similar signs, so pin down the cause before ordering.
This is a control arm for the 2000-2006 Audi TT and the 2000-2006 Audi TT Quattro, designed to fit and perform like the original equipment. This listing is one arm for the front left, which takes one; the front right is ordered separately, and both sides are normally replaced together.
Fit and size
Build and materials
One control arm with rubber bushings. Mounting hardware, a ball joint and a grease fitting are not included, so plan on new mounting bolts.
Interchange: 102-6098
TC1869 · CA12093 · CA2256 · 5CB70055 · RK622170 · CMS70131 · 2608119 · 8N0407151D
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is the Dorman 522-333 a lower arm for the 2000-2006 Audi TT?
Yes. Dorman 522-333 is the front left lower control arm for the 2000-2006 Audi TT, and it also fits the 2000-2006 Audi TT Quattro.
Does the Dorman control arm come with bushings and a ball joint?
Yes to bushings: this arm includes rubber bushings. No to the ball joint, mounting hardware and grease fitting; those are not included, so plan on new mounting bolts.
What is the Dorman OE Solutions control arm made of?
Dorman 522-333 has a steel arm with a powder-coated finish and rubber bushings. It is a casting/forged, standard replacement grade arm that is not adjustable.
What can a worn Dorman lower control arm sound or feel like?
A clunk over bumps, pulling to one side or cracked, torn bushing rubber can be signs of a worn arm. A shop can inspect the arm and its joints properly.
What size are the bushings on Dorman 522-333?
The bushing measures 39.6 mm outside diameter and 14.3 mm inside diameter, with a length of 92 mm. The arm's length is 262.5 mm.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.