Dorman - OE Solutions Suspension Control Arm P/N:524-562
Dorman 524-056 front right lower control arm for the 2011-2015 Jeep Grand Cherokee and other vehicles locates the front right wheel as the suspension moves. Some catalogs list it as a suspension control arm, and it is a standard replacement grade.
A clunk over bumps, uneven front tire wear or a pull in the steering can mean a worn lower arm or worn bushings. A worn ball joint, tie rod, strut or wheel bearing can also produce a clunk or uneven tire wear, so pin down the cause before you buy.
It is a direct-fit replacement lower control arm for the 2011-2015 Jeep Grand Cherokee and the 2011-2015 Dodge Durango. Both front lower arms are normally replaced together, with one on each side of the front axle; this listing is one arm for the front right, and the front left is ordered separately.
Fit and size
Build and materials
One control arm with its bushings. The ball joint, grease fitting and mounting hardware are not included, so plan on new bolts and nuts, since the old ones may not be reusable.
Interchange: 810-582810
5168158AA · 5168158AB · 5181834AA · 68022600AD · TC6754 · CA18073 · RK642830 · GS251127 · CMS251127 · 2607228 · 11CB28146 · 1506086 · X13CA6555 · JTC3016
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this a Jeep Grand Cherokee control arm for the 2011-2015 model years?
Yes, Dorman 524-056 is the front right lower control arm for the 2011-2015 Jeep Grand Cherokee; the front left side is a separate part.
Is this a Dodge Durango control arm for the 2011-2015 model years?
Yes, the front right lower position on the 2011-2015 Dodge Durango takes this arm; the front left side is ordered separately.
Does this Dorman control arm come with bushings?
Yes, Dorman 524-056 includes its rubber bushings. The ball joint, grease fitting and mounting hardware are not included.
What are the material and finish of this Dorman lower control arm?
The arm is steel, casting/forged type, with a powder-coated finish. Its bushings are rubber.
What size are the bushings on this control arm?
The bushings measure 39.6 mm outside diameter, 14.3 mm inside diameter and 92 mm long. The arm itself is 262.5 mm long.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.