Dorman - OE Solutions Suspension Stabilizer Bar Link Kit P/N:542-299
$43.99
(You save)
Rein in body roll and keep your stabilizer bar tied into the suspension with the Dorman - OE Solutions Sway Bar Link Kit (542-299). It drops in as a direct-fit replacement for the 2001-2005 Lexus IS300 (All), where a worn sway bar link can bring on clunking or rattling over bumps and looser, sloppier handling through corners.
Engineered to install and perform like the original on the listed application, this greaseable link is built from steel and finished with a protective coating for rust and corrosion resistance.
Greaseable design: grease fittings let you re-lubricate the joint, while polymer bearings and dust boots help keep contaminants out.
Steel construction: coated finish for rust and corrosion resistance.
Male threaded ends: End 1 at 12 mm and End 2 at 10 mm, with a 1.5 mm thread pitch across a 106.5 mm overall length.
Ready to install: includes two locking nuts; bushings, bolts, washers, sleeves, and spacers are not included.
Cataloged for the front suspension, standard replacement grade. Country of origin: India. Each listed application uses two links; this listing is for one link, so order 2 to replace both sides for balanced handling.
It's a direct-fit replacement for the 2001-2005 Lexus IS300 (All). Each application uses two links, so order 2 to replace both sides.
Is this a front or rear link?
This link is cataloged for the front suspension.
Is the link greaseable?
Yes. It includes grease fittings so the joint can be re-lubricated, and it has polymer bearings and dust boots to help keep contaminants out.
What's included in this stabilizer bar link kit?
The kit contains one stabilizer bar link and two locking nuts. Bushings, bolts, washers, sleeves, and spacers are not included.
What are the signs my sway bar links may need replacing?
Clunking or rattling over bumps and looser handling or more body roll through corners can be signs a link is worn. Diagnose the cause before replacing.
Write a Review
Dorman
Dorman - OE Solutions Suspension Stabilizer Bar Link Kit P/N:542-299
Help keep your Sienna's front end composed through turns with the Dorman OE Solutions Sway Bar Link Kit, part number 542-542. It is a direct-fit front replacement for the 2011-2020 Toyota Sienna. It...
Tame body roll and keep your front stabilizer bar tied to the suspension with the Dorman - OE Solutions Suspension Stabilizer Bar Link Kit 542-516. This sway bar link kit installs as a direct-fit...
Tie the rear stabilizer bar to the suspension and keep body roll in check with the Dorman - OE Solutions Suspension Stabilizer Bar Link Kit 542-577. It fits many vehicles, among them the 2007-2009...
Keep the rear stabilizer bar tied to the suspension with the Dorman - OE Solutions Suspension Stabilizer Bar Link Kit 542-575. This sway bar link connects the rear stabilizer bar to the suspension so...
Help keep body roll in check and support a solid, connected feel over bumps with the Dorman - OE Solutions Suspension Stabilizer Bar Link Kit 542-336. This stabilizer bar link kit ties the sway bar...
WARNING:
These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov.
