Steady the body and keep your rear sway bar tied to the suspension with the Dorman - OE Solutions Suspension Stabilizer Bar Link Kit 542-575. This rear stabilizer bar link connects the rear stabilizer (sway) bar to the suspension, helping control body roll and sway. It installs as a direct-fit replacement for the original equipment on the 2004-2009 Dodge Durango [All] and 2007-2009 Chrysler Aspen [All].
- Steel construction: steel link with a coated finish that resists rust and corrosion.
- Greaseable: includes a grease fitting so the joint can be lubricated; it is not pre-greased.
- Serviceable joint: dust boot and polymer bearing included, with a black rubber-and-steel bushing.
- Hardware: includes one locking nut; bolts, washers, separate bushings, a sleeve, and a spacer are not included.
Specs: 94 mm length, bushing inside diameter 12.5 mm and outside diameter 40 mm, End 1 threaded attachment 12.5 mm, End 2 male-threaded attachment 12 mm, thread pitch 1.5 mm; non-adjustable. Country of origin: China. Signs this link may need replacing include clunking or rattling from the rear over bumps and increased body sway in corners; diagnose the cause before replacing. Each listed application uses two — sold individually as one link plus one nut, so order two for a complete rear replacement.
Interchange: 45G0376 · 46G0376A · 606.67015 · 52113285AA · 55398928AA · 55398928AB · TC5962 · EL262HD · K80947 · SL467 · SL467E · GS25809 · MS25809 · MS25841 · 2106040 · JTS1158
Manufacturer part number 542-575 (also 542575).
This part cross-references / interchanges with the following part numbers:
Frequently Asked Questions
Does this fit the front or rear?
This is a rear stabilizer bar link kit. It fits the rear suspension of the listed 2004-2009 Dodge Durango [All] and 2007-2009 Chrysler Aspen [All] applications.
What is included in the kit?
One stabilizer bar link and one locking nut, with a grease fitting, dust boot, and polymer bearing. Bolts, washers, separate bushings, a sleeve, and a spacer are not included.
How many do I need?
Each listed application uses two. The link is sold individually (one link plus one nut), so order two for a complete rear replacement.
Is this link greaseable?
Yes. It includes a grease fitting so the joint can be lubricated. It is not pre-greased, so grease the fitting per the service procedure at installation.
How do I know if my stabilizer bar link is worn?
Signs it may need replacing include clunking or rattling from the rear over bumps and increased body sway in corners. Diagnose the cause before replacing, as other parts can cause similar symptoms.
Write a Review