Rein in body roll and quiet the clunks with the Dorman - OE Solutions Suspension Stabilizer Bar Link Kit 542-590 — a front stabilizer bar link that ties the sway bar to the suspension so the bar can resist body lean through corners. It drops in as a direct replacement for the 2015-2017 Chrysler 200 [All], where each vehicle uses two links (one per side).
- Steel construction: coated to resist rust and corrosion.
- Greaseable: grease fittings are included so you can re-lubricate the joint; it ships not pre-greased.
- Polymer bearings and dust boot: included, along with locking nuts and mounting hardware for the installation.
- Specs: male threaded ends on both ends, 10 mm end attachment size, 1.5 mm thread pitch, 283.5 mm overall length; non-adjustable. Washers, bushings, bolts, sleeves, and spacers are not included.
Worn stabilizer bar links often announce themselves with clunking or rattling from the front over bumps and looser, roll-prone handling. If a failed link is the cause of those symptoms, this kit replaces it and re-establishes the connection between the sway bar and the suspension. Sold as one link — order two to replace both sides as a matched pair. Country of origin: Thailand.
Interchange: 68241038AA · 68241038AB · TC5272 · K750747 · MS258114 · JTS1560
Manufacturer part number 542-590 (also 542590)
This part cross-references / interchanges with the following part numbers:
Frequently Asked Questions
What does the stabilizer bar link do?
It connects the stabilizer (sway) bar to the suspension so the bar can resist body lean in corners. Worn links can cause clunking or rattling over bumps and looser handling.
Will this fit my vehicle?
It's a direct replacement for the 2015-2017 Chrysler 200 [All]. Check the Buyer's Guide tab to confirm your exact vehicle.
Is this stabilizer bar link greaseable?
Yes. It includes grease fittings so you can re-lubricate the joint. It is not pre-greased, so grease it per the service procedure at installation.
What's included in the kit?
The kit includes the link with polymer bearings, a dust boot, locking nuts, and mounting hardware. Washers, bushings, bolts, sleeves, and spacers are not included.
How many do I need?
This listing is for one link. The 2015-2017 Chrysler 200 uses two, so order two to replace both sides together as a matched pair for balanced handling.
Write a Review