Keep rear body roll in check and quiet down suspension clunks with the Dorman - OE Solutions Suspension Stabilizer Bar Link Kit 542-545. This rear stabilizer bar link connects the rear stabilizer (sway) bar to the suspension so both sides work together to limit body lean through turns. It's a direct-fit rear replacement for the 2024 Lexus RZ300E, 2023-2024 Lexus RZ450E, 2019-2022 Lexus UX200, 2019-2024 Lexus UX250H, 2023-2024 Subaru Solterra, 2023-2024 Toyota bZ4X, 2018-2022 Toyota C-HR, 2019-2024 Toyota Corolla, 2022-2024 Toyota Corolla Cross, 2016-2024 Toyota Prius, 2019-2022 Toyota Prius AWD-e, and 2017-2024 Toyota Prius Prime (engine: All) — see the Buyer's Guide tab for the full list. If a worn link is the cause of rattles or clunks over bumps, this replaces it.
- Coated steel construction: a coated finish helps resist rust and corrosion.
- Serviceable design: polymer bearings, pre-greased and greaseable via an included grease fitting, with a dust boot to shield the joint.
- Specs: 330 mm length, male-threaded ends, 12 mm end-attachment sizes, 12 mm center bolt head, 1.5 mm thread pitch.
- Included: locking nuts; bushings, bolts, washers, sleeve, and spacer are not included.
The listed applications use 2 per vehicle; this package contains one link, so order 2 for a complete rear replacement. Manufacturer part number 542-545. Country of origin: China.
This part cross-references / interchanges with the following part numbers:
Frequently Asked Questions
What does this stabilizer bar link kit do?
It connects the rear stabilizer (sway) bar to the suspension, helping tie both sides together to limit body roll through turns. A worn link can allow rattles or clunks over bumps.
Which vehicles does it fit?
It's a rear direct-fit replacement for listed Lexus RZ300E, RZ450E, UX200, UX250H, Subaru Solterra, Toyota bZ4X, C-HR, Corolla, Corolla Cross, Prius, Prius AWD-e and Prius Prime. See the Buyer's Guide tab.
How many do I need?
The listed applications use 2 per vehicle. This package contains one link, so order 2 to replace both sides for even handling.
Is it greaseable?
Yes. It ships pre-greased and is greaseable through an included grease fitting, with a dust boot to help protect the joint.
What's included and what is it made of?
It's coated steel with polymer bearings and includes locking nuts. Bushings, bolts, washers, sleeve, and spacer are not included.
Write a Review