Dorman 999-844 suspension subframe for the 2014-2016 Mercedes-Benz E350 and other vehicles provides a secure mounting point for suspension components. It replaces a subframe that is damaged from rust or collision impact.
- Steel frame with a bolt-in design
- Four mounting holes, each 12 mm in diameter
- Load rate of 4200 pounds
- Part of the Dorman OE Solutions line
Quick facts
- Part: Dorman 999-844 suspension subframe
- Fits: 2014-2016 Mercedes-Benz E350 and other vehicles
- Material: Steel
- Condition: New
A rusted, cracked or collision-bent subframe can be behind a clunk or a loose feel in the suspension, though worn control arm bushings or a loose strut mount can also be the source, so find the cause before ordering. The 2014-2016 Mercedes-Benz E350 takes one.
Fits
The vehicles it fits include the 2014-2016 Mercedes-Benz E350, the 2012-2015 Mercedes-Benz C250 and the 2012-2015 Mercedes-Benz C350, among others. It is a direct-fit replacement for these vehicles.
Specifications
Fit and size
- Quantity per vehicle: 1
- Length: 47 in
- Maximum width: 25 in
- Height: 11 in
- Mounting holes: 4, each 12 mm in diameter
Build and materials
- Frame material: Steel
- Installation: Bolt in
- Design: OE replacement
- Load rate: 4200 lb
- Condition: New
- Country of origin: Canada
In the box
One subframe. Mounting hardware, engine mounts and transmission mounts are not included, so plan on new bolts rather than reusing the old ones.
Interchange: 2073509702 · 2123503805 · A2073509702
This part cross-references / interchanges with the following part numbers:
2073509702, 2123503805, A2073509702
Frequently Asked Questions
Is the Dorman 999-844 suspension subframe right for the 2012-2015 Mercedes-Benz C250?
Yes, Dorman 999-844 fits the 2012-2015 Mercedes-Benz C250. If your car is not named here, look up its year and model in the "Vehicles it fits" section.
Does this subframe come with bolts and engine mounts?
No. This listing is one subframe. Mounting hardware, engine mounts and transmission mounts are not included and are bought separately.
What is the load rate of this steel subframe?
The load rate is 4200 pounds. The frame is steel and has four mounting holes of 12 mm.
What are signs a suspension subframe is damaged?
Heavy rust, cracks or a bend after a collision are reasons to have it inspected. A clunk or loose feel in the suspension is also worth a shop visit, since a shop can inspect it safely on a lift.
Is the Dorman 999-844 subframe bolt-in or welded in?
It is bolt-in, not welded in. Dorman 999-844 is listed as an OE-replacement design and is sold as one subframe.
