Wagner Brake Drum Brake Shoe P/N:Z55DR
Wagner Brake Z197R drum brake shoe for the 1959-1970 Buick Electra and other vehicles presses its friction material against the brake drum to slow the wheel.
A worn shoe can show up as grinding or scraping when you brake, a pedal that travels farther than before, or a pull to one side. Before you replace the shoes, rule out other causes of those signs, such as a worn drum or a leaking wheel cylinder. This listing is one shoe, and the shoes on both sides of an axle are normally replaced together.
It is listed for a wide range of Buick models, including the 1962-1964 Buick Estate Wagon and the 1959-1970 Buick LeSabre, at one shoe per application.
Fit and size
Build and materials
One drum brake shoe. Mounting hardware is not included, so plan on new hardware rather than reusing the old pieces.
Interchange / FMSI:
FMSI: S197R
Interchange: AXS197 · AXS197R · BS197R · BS216 · BX197 · R197 · 197PB · 197PG · 197SG
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Wagner Brake Z197R drum brake shoe fit a 1959-1970 Buick LeSabre?
Yes, Wagner Brake Z197R is listed for the 1959-1970 Buick LeSabre, the 1959-1970 Buick Electra and the 1962-1964 Buick Estate Wagon. If your Buick is not named here, look it up in the "Vehicles it fits" section.
Are the levers and pins included with this Z197R drum brake shoe?
On select applications, yes: attached levers and pins that match the OE design come with the shoe. Mounting hardware is not included.
What friction material and thickness does the Wagner Brake Z197R shoe have?
Wagner Brake Z197R has an organic friction material that is riveted to the shoe. The friction material is 0.250 in thick on the primary and 0.290 in thick on the secondary.
How can I tell when riveted drum brake shoes like these are wearing out?
Signs can include grinding or scraping when braking, a pedal that travels farther than before, or a pull to one side. A shop can inspect the brakes and measure the friction material.
What drum size and shoe width is this drum brake shoe made for?
This shoe is made for a 12.000 in brake drum and is 2.250 in wide.
No reviews yet — be the first to review this product.
Write a ReviewWARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.