Anchor 10046 front right engine mount for the 2012-2018 Audi A6 4-cylinder 2.0L supports the engine and dampens vibration. As an Anchor motor mount, it is a hydraulic type made for the front right position.
- Hydraulic design intended to dampen excess noise and vibration
- Natural and Styrene Butadiene rubber that resists abrasion and stays stable as it ages
- Chemlock® bonding agent for the rubber-to-metal bond
- Rubber made to a specific Durometer (hardness) for the application
- Aluminum mount with a powder-coated finish
Quick facts
- Part: Anchor 10046 engine mount
- Fits: 2012-2018 Audi A6 4-cylinder 2.0L
- Position: Front right
- Material: Aluminum
- Condition: New
A clunk when accelerating, decelerating or shifting, vibration at idle, or cracked or separated rubber can mean a mount has worn out. A worn transmission mount or one of the other engine mounts can be behind these signs too, so find the cause before buying this one.
Fits
This mount is a direct-fit replacement for the 2012-2018 Audi A6 4-cylinder 2.0L, built to OE standards using a CAD/CAM engineering process.
Specifications
Fit and size
- Position: Front right
- Quantity per vehicle: 1
- Mounting holes: 4
- Mounting hole diameter: 12.5 mm (0.49 in)
Build and materials
- Type: Hydraulic
- Mount material: Aluminum
- Bushing material: Rubber
- Finish: Powder coated
- Construction: Stamped
- Condition: New
- Warranty: Anchor 12-month warranty
- Country of origin: China
In the box
One engine mount. This listing holds one mount, and the 2012-2018 Audi A6 4-cylinder 2.0L takes one in the front right position. Mounting hardware, a mounting bracket and a heat shield are not included, so plan on new bolts, since the old ones may not be reusable.
Interchange: 4G0199381QG · A4941 · B4941 · EM7391
This part cross-references / interchanges with the following part numbers:
4G0199381QG, A4941, B4941, EM7391
Frequently Asked Questions
Is this the right motor mount for the 2012-2018 Audi A6 4-cylinder 2.0L?
Yes. Anchor 10046 is the front right engine mount for the 2012-2018 Audi A6 4-cylinder 2.0L, and that car takes one in this position.
Does Anchor 10046 come with bolts?
No. Mounting hardware, a mounting bracket and a heat shield are not included with Anchor 10046, so plan on new bolts. The listing is one mount.
What rubber do Anchor engine mounts use?
This front right mount uses natural and Styrene Butadiene rubber, made to a specific Durometer (hardness) for the application. A Chemlock® bonding agent holds the rubber to the metal.
How can I tell if a front right engine mount is worn?
A clunk on acceleration, deceleration or shifting, or vibration at idle, can point to a worn mount. Cracked or separated rubber is visible with the engine off and cool.
Is this front right mount hydraulic, and how big are its mounting holes?
Yes, it is a hydraulic type with four mounting holes, each 12.5 mm (0.49 in) in diameter. The mount itself is powder-coated aluminum.
