Dorman Bolt P/N:960-730D
Dorman 960-120 bolt is one of the Dorman flange bolts, a hex-head fastener that clamps parts together with a 5/16-18 thread. The built-in flange under the head works like a washer to spread the clamping load.
A bolt with rust, a rounded hex head or damaged threads can need replacing. A stripped threaded hole, a bent bracket or a worn washer can be behind a loose joint too, so find the cause before buying.
This is universal hardware, sold by size and thread rather than by application. Match the 5/16-18 thread and 2 in. length to the bolt being replaced.
Fit and size
Build and materials
Three bolts.
Product information is for general reference and may contain errors. See our Disclaimer.
Is this Dorman bolt heat hardened?
Yes. Dorman 960-120 is a Grade 8 steel bolt that is heat hardened, with a yellow zinc finish.
How many bolts come in the Dorman 960-120 pack?
The pack holds 3 bolts. Dorman 960-120 is sold by size and thread, so it is not tied to one application.
What thread does this flange bolt have?
This bolt has a 5/16 in. fine thread with 18 threads per inch and a 2 in. thread length. The hex head takes a 0.5 in. tool.
How do I tell if a 5/16-18 x 2 in bolt matches the one I'm replacing?
Compare thread diameter, threads per inch and length with the old bolt. This one is 5/16-18, fine thread, 2 in. long, SAE sizing.
Is the Dorman 960-120 bolt corrosion tested?
Yes. The hardware goes through salt spray testing for corrosion resistance and has a yellow zinc finish.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.