Dorman Bolt P/N:980-420D
Dorman 960-420D bolt is a Grade 8 hex bolt that clamps parts together through a 1/2 in.-13 coarse thread. This Dorman bolt can be used in a variety of applications, from auto to home.
A bolt with rust, stripped threads or a rounded head may be ready for replacement. A stripped nut, a damaged threaded hole or a bent bracket can be behind a loose joint too, so find the cause before buying. The pack holds two bolts.
This is universal hardware, sold by size and not by vehicle. Match the thread size, length and head size to the bolt you are replacing.
Fit and size
Build and materials
Two bolts.
Interchange: 004540 · 4540
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
How do I know the Dorman 960-420D bolt matches the one I'm replacing?
Match the 1/2 in.-13 coarse thread, the 2 in. length and the 0.75 in. head tool size of your old bolt to the Dorman 960-420D. It is sold by size, not by vehicle.
How many bolts come in the Dorman 960-420D pack?
Two bolts come in each pack. Each one is a Grade 8 bolt in 1/2 in.-13 x 2 in. size.
Is this bolt a coarse or fine thread?
It is a coarse thread with 13 threads per inch on a 1/2 in. SAE thread diameter.
Is the yellow zinc finish on this bolt tested for corrosion?
Yes. The Dorman 960-420D bolt goes through salt spray testing to confirm its corrosion resistance.
What grade is this steel bolt, and is it heat hardened?
This steel bolt is Grade 8, and it is heat hardened.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.