Dorman Bolt P/N:960-420D
Dorman 981-420D bolt clamps parts together with a hex head and an M8-1.25 thread that is 20 mm long. The Dorman bolt suits a variety of uses, from auto to home.
A bolt with heavy rust, a rounded hex head or damaged threads can mean it is due for replacement. Before you replace a bolt, rule out a stripped or cross-threaded hole in the part it screws into, since a damaged hole can look like a bad bolt.
This is universal hardware, chosen by size and thread rather than by model. Match the M8-1.25 thread, the 20 mm length and the hex head to the bolt you are replacing.
Fit and size
Build and materials
Six bolts.
Interchange: 005200 · 5200
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
What thread size is the Dorman 981-420D bolt?
The Dorman 981-420D has a metric M8-1.25 thread: 8 mm diameter, 1.25 mm pitch and 20 mm thread length. Match these sizes to the bolt you are replacing.
How many bolts come in the Dorman 981-420D pack?
The Dorman 981-420D listing holds six bolts. The package contents list nothing else.
Is this M8 hex bolt Class 10.9 and heat hardened?
Yes. Dorman 981-420D is a Class 10.9 steel bolt that is heat hardened, with a yellow zinc finish.
How can I tell when an M8 bolt like this is worn out?
Visible rust, a rounded hex head or damaged threads can mean the bolt is worn. A shop can inspect any bolt that holds a safety-related part.
Has this hex bolt been tested for corrosion?
Yes. The hardware goes through salt spray testing to check its corrosion resistance, and it has a yellow zinc finish.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.