Dorman Bolt P/N:980-531D
Dorman 981-531D bolt is a Class 10.9 flanged hex bolt that clamps parts together with an M10-1.25 thread. These Dorman flange bolts come four to a pack.
Damaged or stripped threads, a rounded head or heavy rust can mean a bolt is no longer clamping as it should. Look it over with the engine off and cool, and work out what loosened or overloaded it before you swap it, because a new bolt will not remove that cause.
This is universal hardware, so you choose it by size rather than by application. Match the M10-1.25 thread, the 30 mm thread length and the Class 10.9 grade to the bolt you are replacing.
Fit and size
Build and materials
Four bolts.
Interchange: 006190 · 5023
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
How do I know the Dorman 981-531D flange bolt matches the one I'm replacing?
Match the M10-1.25 thread, the 30 mm length, the Class 10.9 grade and the flange head. Dorman 981-531D is sold by size and specs, not by application.
How many bolts come in the Dorman 981-531D pack?
The Dorman 981-531D pack holds four bolts. Nothing else is listed in the box.
What size is this Dorman bolt?
This Dorman bolt is M10-1.25 x 30 mm, with a 10 mm thread diameter, a 1.25 mm pitch and a 30 mm thread length.
Is the 981-531D flange bolt steel with a zinc finish?
Yes. This flange bolt is Class 10.9 steel with a yellow zinc finish and heat hardening.
Are these flange bolts tested for rust resistance?
Yes. The hardware goes through salt spray testing to check its corrosion resistance.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.