Dorman Bolt P/N:981-531D
Dorman 980-531D bolt is a Class 10.9 hex fastener that clamps parts together in an M10-1.25 x 30 mm size. This Dorman bolt is made of steel and sold by size rather than by vehicle.
A bolt that is rusted, bent, or has rounded or stripped threads can be worn out. Before you replace it, rule out a damaged threaded hole or a loose part that is putting extra strain on the bolt.
This is universal hardware. Match the M10-1.25 thread and the 30 mm thread length to the bolt you are removing.
Fit and size
Build and materials
Four bolts.
Interchange: 005390 · 5390
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
What thread pitch does the Dorman 980-531D bolt have?
The Dorman 980-531D is a metric M10-1.25 bolt: 10 mm thread diameter, 1.25 mm thread pitch, medium thread and 30 mm of thread length. Match the thread and length to the bolt you are replacing.
How many bolts come in the Dorman 980-531D pack?
The pack contains four bolts.
Is this Class 10.9 hex bolt heat hardened?
Yes. The Dorman 980-531D is a Class 10.9 steel bolt that is heat hardened and has a yellow zinc finish.
Has this yellow zinc bolt been salt spray tested?
Yes. The hardware undergoes salt spray testing to confirm its corrosion resistance.
What shows that an M10 hex bolt is worn out?
Rounded or stripped threads, a bent shank or a rounded head can mean the bolt is worn. Compare its thread pitch and length with the 1.25 mm and 30 mm specs.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.