Dorman Bolt P/N:980-420D
Dorman 980-532 bolt holds parts together with a hex head and a built-in flange that spreads the clamping load. These Dorman flange bolts can be used in a variety of jobs, from auto to home.
A rounded head, stripped threads or rust that has eaten into the shank can mean the bolt is worn out, though a damaged threaded hole or a bent bracket can also be behind a loose joint.
This bolt is chosen by size and thread, not by application, so match the M10-1.5 thread, the 35 mm length and the flange head to the bolt you are replacing; the pack holds three bolts.
Fit and size
Build and materials
Three bolts.
Product information is for general reference and may contain errors. See our Disclaimer.
What size is this Dorman bolt and which tool fits the head?
Dorman 980-532 is an M10-1.5 x 35 mm bolt with a coarse, clockwise thread and a 15 mm hex head tool size. Match these to the bolt you are replacing.
How many bolts come in the Dorman 980-532 pack?
Each pack holds three bolts, as listed in the package contents for Dorman 980-532.
Is this bolt Class 10.9 and what is it made of?
Yes. This bolt is Class 10.9 steel and is heat hardened.
How can I tell when a flange bolt is worn?
Stripped or rounded threads, a cracked or rounded head and heavy rust can mean a bolt needs replacing. Look at it only with the part cool and at rest.
Is the Dorman 980-532 bolt tested for corrosion?
Yes. The hardware goes through salt spray testing to check corrosion resistance, and the finish is zinc.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.