Dorman Bolt P/N:960-420D
Dorman 980-420D bolt is a flanged hex bolt that clamps parts together and spreads the load across its flange. These Dorman flange bolts come four to a pack and suit fastening jobs from auto to home.
Rust, a rounded hex head or damaged threads can mean a bolt is worn, though a stripped threaded hole or a bent bracket can be behind a loose joint too, so look at those before blaming the bolt.
This is universal hardware sold by size rather than by application, so match the thread, length and grade to the bolt you are replacing.
Fit and size
Build and materials
Four bolts.
Interchange: 006100 · 5036
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Which bolt size does the Dorman 980-420D match?
Dorman 980-420D is an M8-1.25 bolt, 20 mm long, in Class 10.9. It is sold by size and thread, so match all three to the bolt you are replacing.
How many bolts come in this pack?
The pack holds four flange bolts. Each one is M8-1.25 X 20 mm.
Is this Dorman bolt zinc plated or bare steel?
This steel bolt has a yellow zinc finish, and the hardware also undergoes salt spray testing for corrosion resistance.
What signs show an M8 flange bolt should be replaced?
Visible rust, a rounded hex head or damaged threads can mean the bolt is worn. A shop can check a joint that keeps loosening.
Is the Dorman 980-420D bolt heat hardened?
Yes. This Class 10.9 steel bolt is heat hardened and made to specific thread tolerance standards.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.