Dorman Bolt P/N:980-531D
Dorman 980-245 bolt clamps parts together with a flanged hex head, and this pack holds three Dorman flange bolts.
Rust, stripped threads or a rounded hex head can mean a bolt is due for replacement. A loose part or a rattle alone does not prove the bolt is at fault, since a worn bracket or a damaged threaded hole is another common source.
This is universal hardware, sold by its size, thread and specs rather than by application. Match the M6-1 thread, the 50 mm length and the Class 10.9 grade to the bolt you are replacing.
Fit and size
Build and materials
Three bolts.
Product information is for general reference and may contain errors. See our Disclaimer.
What size is the Dorman 980-245 bolt and how do I match it?
Dorman 980-245 is an M6-1 x 50 mm flange bolt in Class 10.9. Match the thread diameter, pitch and length to the bolt you are replacing, since it is sold by size.
How many bolts come in the Dorman 980-245 pack?
The Dorman 980-245 pack contains three M6-1 x 50 mm flange bolts.
Does the Dorman bolt have a zinc finish?
Yes. This steel bolt has a yellow zinc finish, and the hardware is salt spray tested for corrosion resistance.
How can I tell when an M6 flange bolt is worn out?
With the engine off and cool, look at the removed bolt. Rust, stripped threads or a rounded hex head can mean it needs replacing.
What does Class 10.9 mean on this flange bolt?
Class 10.9 is the bolt grade listed for this M6-1 x 50 mm bolt, and the steel is heat hardened. Pick a replacement with the same grade as the bolt you are removing.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.