Dorman Bolt P/N:980-532
Dorman 980-112D bolt is a Class 10.9 metric hex bolt that clamps one part to another. This Dorman bolt comes four to a pack and is chosen by size and thread rather than by what you drive.
A bolt with stripped threads, rust or a rounded hex head can need replacing. Before you replace one that keeps loosening, rule out a damaged thread in the hole and a part that has shifted, since either can loosen a good bolt too.
This bolt is not listed by make or model. Match its M5-.8 thread and 12 mm length to the bolt you are replacing; the pack supplies four.
Fit and size
Build and materials
Four bolts.
Interchange: 980-112
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
What thread do I match when replacing a bolt with the Dorman 980-112D?
Match the M5-.8 thread (5 mm diameter, 0.8 mm pitch) and the 12 mm length to the bolt you are removing. Dorman 980-112D is a metric hex bolt.
How many bolts come in the Dorman 980-112D pack?
One pack holds four hex bolts. Dorman 980-112D is sold by size and thread.
What socket size fits the head of this M5 hex bolt?
The head tool size is 0.31 in, and the head takes a hex drive.
What is this Class 10.9 bolt made of, and is it coated?
This bolt is steel with a yellow zinc finish, and it is heat hardened. The hardware is salt spray tested for corrosion resistance.
How can I tell when an M5 hex bolt needs replacing?
Look for stripped or damaged threads, rust or a rounded hex head once the bolt is out. A shop can help if the same joint keeps working loose.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.