Bolt - Dorman 960-110D

$24.99

Part number: 960-110D

UPC: 885484897823

Condition: New

Weight: 0.15 LBS

Item Package Quantity: 1

$24.99

Current Stock: 14

Quantity:

Adding to cart… The item has been added

Have questions?

Ask an Expert

Dorman Bolt P/N:960-110D

$24.99

Description

Dorman 960-110D bolt is a Grade 8 hex flange bolt that clamps parts together and spreads the clamping load under its flange. These Dorman flange bolts come four to a pack and are sold by size and thread.

Grade 8 steel bolt, heat hardened for strength
Yellow zinc finish, with salt spray testing for corrosion resistance
Fine SAE thread: 5/16-18, with 18 threads per inch
Made to specific thread tolerance standards
Flanged hex head driven with a 0.5 in tool
Multipurpose use in applications from auto to home

Quick facts

Part: Dorman 960-110D bolt
Material: Steel
Condition: New

A rounded hex head or stripped threads are signs a bolt needs replacing. A damaged tapped hole, a distorted bracket or a mismatched nut can be behind a loose joint as well, so find out why the old bolt failed before you buy.

Fits

This bolt is chosen by size and thread, not by application. Match the thread diameter, thread pitch, length and head size to the bolt you are replacing.

Specifications

Fit and size

Callout size: 5/16-18 X 1 in
Thread diameter: 5/16 in
Threads per inch: 18
Thread length: 1 in
Head tool size: 0.5 in
Pieces in the pack: 4 bolts

Build and materials

Type: flange bolt, hex head drive
Thread: fine, SAE
Bolt grade: 8
Material: steel, heat hardened
Finish: yellow zinc
Condition: new
Country of origin: India

In the box

Four bolts.

Interchange: 002950 · 2950

Product information is for general reference and may contain errors. See our Disclaimer.

Manufacturer's description

Product specs

Vehicles it fits

Interchange numbers

This part cross-references / interchanges with the following part numbers:

002950, 2950

Buyer's Q&A

Frequently Asked Questions

Which measurements should I match when replacing a 5/16-18 x 1 in flange bolt?

Match the 5/16 in thread diameter, the fine 18 threads per inch, the 1 in thread length and the 0.5 in head tool size of Dorman 960-110D to the bolt you are replacing.

How many bolts come in the Dorman 960-110D pack?

The pack holds four bolts, sold together as one listing.

Is the Dorman bolt Grade 8 and corrosion tested?

Yes. Dorman 960-110D is a Grade 8 steel bolt, heat hardened, with a yellow zinc finish, and the hardware goes through salt spray testing for corrosion resistance.

How can I tell if a flange bolt is worn out?

With the engine off and cool, look at the bolt for a bent shank, a deformed flange or heavy rust. A shop can also inspect it if you are unsure.

Is Dorman 960-110D the same bolt as number 002950?

Yes. 002950 and 2950 are listed as interchange numbers for Dorman 960-110D.