Raybestos Brakes Disc Brake Caliper P/N:FRC11879N
Tackle a leaking or sticking rear left caliper with the Raybestos R-Line FRC11588, a Ford F-350 Super Duty brake caliper built as a direct-fit replacement for the 2005-2012 Ford F-350 Super Duty and 2011-2012 Ford F-450 Super Duty, all engines. This remanufactured semi-loaded caliper and bracket assembly is a floating design with a cast-iron casting and a 2.122 in (53.9 mm) piston.
Raybestos R-Line non-plated calipers are remanufactured OE parts. Castings, guide pins and brackets are carefully inspected before they are reused, and every rubber and sealing component is new.
Specifications: 3/8-24 bleeder screw thread; 16 mm caliper bracket mounting holes with a 2.0 mm thread pitch. Country of origin: Mexico.
The listed applications use one caliper at the rear left position. Replacing both rear calipers together is recommended for balanced braking. Signs a caliper may need replacing include brake fluid leaking at the wheel, a dragging brake, uneven pad wear or reduced stopping power; diagnose the cause before replacing parts.
Interchange: 99-17938B · 18-B5029 · 18-P5029 · 141.65526 · 142.65526 · 14-3316
SC1393 · BC3Z2553A · 9917938B · 18B5029 · 18P5029 · 14165526 · 14265526 · 143316
This part cross-references / interchanges with the following part numbers:
Which trucks does the Raybestos FRC11588 fit?
It is a direct-fit replacement at the rear left position for the 2005-2012 Ford F-350 Super Duty and 2011-2012 Ford F-450 Super Duty, all engines. See the Buyer's Guide tab for details.
What is a semi-loaded disc brake caliper?
This semi-loaded unit supplies the remanufactured floating caliper together with its mounting bracket, so the caliper and bracket are replaced as one assembly.
Which parts are replaced with new during remanufacturing?
Raybestos replaces the seals, boots, bleeder screws, abutment hardware, banjo bolts and O-rings with new materials. Castings, guide pins and brackets are inspected before reuse.
What are the key specifications of this caliper?
It is a floating caliper with a cast-iron casting, a 2.122 in (53.9 mm) piston, a 3/8-24 bleeder screw thread and 16 mm bracket mounting holes with a 2.0 mm thread pitch.
What are signs a rear caliper may need replacing?
Brake fluid leaking at the wheel, a dragging brake, uneven pad wear or reduced stopping power can indicate a caliper problem, among other causes. Have the brake system diagnosed first.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.