Gates Accessory Drive Belt P/N:2/9550PB
Gates 2/C90 accessory drive belt for the 1985 Mci 102-A3 bus and other vehicles carries engine power to the air conditioning system. This Gates accessory drive belt meets RMA oil and heat resistant standards and static conductivity requirements.
Cracked or frayed edges, a glazed surface or a squeal from the drive can mean a belt is worn. Before you replace it, rule out oil on the belt and worn or misaligned pulleys, which can also make a belt slip.
This accessory drive belt fits the 1985 Mci 102-A3 bus and the 1985 Motor Coach Industries 102A3 V6 9.0L. The 1985 Mci 102-A3 bus takes one.
Fit and size
Build and materials
Interchange: RC90-2 · RCP90-2
41013390 · 99150749
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Gates 2/C90 accessory drive belt fit the 1985 Mci 102-A3 bus?
Yes. The Gates 2/C90 accessory drive belt fits the 1985 Mci 102-A3 bus, and that bus takes one.
How big is this accessory drive belt?
The outside circumference is 94 in (2388 mm). It is a C cross section with two strands, 2 in (51 mm) wide across the top and 0.88 in (22 mm) per strand.
Is the Gates 2/C90 belt made of EPDM?
Yes. The Gates 2/C90 has an EPDM belt material with polyester cords, and a Flex-Weave fabric cover over the belt.
What temperature range does this accessory drive belt cover?
The temperature range is -22°F to +140°F (-30°C to +60°C). The Flex-Weave cover also protects the belt core from oil, contaminants and heat.
Does the Gates 2/C90 replace RC90-2?
Yes. RC90-2 is one of the numbers this Gates 2/C90 accessory drive belt replaces.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.