Gates Engine Coolant Bypass Hose 12283
Gates Engine Coolant Bypass Hose 12283

Gates Engine Coolant Bypass Hose P/N:12283

Be the first to review this product
$13.99
MPN: 12283
UPC: 770075768791
Item Package Quantity: 1

Have questions?

Ask an Expert
Gates Engine Coolant Bypass Hose P/N:12283
Gates Engine Coolant Bypass Hose P/N:12283
$13.99

Keep coolant circulating through the engine's bypass circuit with the Gates Coolant Bypass Hose / Heater Hose (MPN 12283), a factory-molded, OEM-style hose that drops in as a direct-fit replacement for the 2016-2018 Toyota Tacoma [V6-3.5L]. Its pre-formed shape is built to fit today's smaller, tighter engine compartments and routes pipe-to-pipe.

  • EPDM construction: EPDM tube, synthetic fiber knit reinforcement, and EPDM cover.
  • Spec-rated: Meets SAE 20R3 Type EC Class D-1 and D-2 specifications, with a temperature range of -40°F to 275°F (-40°C to 135°C).
  • Durability: Engineered to resist electrochemical degradation, a leading cause of hose failure.
  • Molded fit: Factory-molded to an OEM-style contour; centerline length 6.41 in (163 mm) with a 0.62 in (16 mm) inside diameter at both ends.

Suitable for coolant, water, and air applications, and also approved for marine use. Do not use for fuel or oil transfer applications. Gates recommends replacing the hose clamps each time a new coolant hose is installed. Country of origin: United States.

Interchange: 14951S · F10560 · 13283 · 162930P010

This part cross-references / interchanges with the following part numbers:

14951S, F10560, 12283, 13283, 162930P010

Frequently Asked Questions

What does this hose do?

It carries engine coolant through the bypass circuit, routing pipe-to-pipe. This factory-molded hose is a direct-fit replacement for a worn, cracked, or leaking original.

Does the Gates 12283 fit my vehicle?

It is listed as a direct-fit replacement for the 2016-2018 Toyota Tacoma with the V6-3.5L engine. Check the Buyer's Guide tab to confirm fitment for your vehicle.

What is this hose made of?

It uses an EPDM tube, synthetic fiber knit reinforcement, and an EPDM cover, and meets SAE 20R3 Type EC Class D-1 and D-2 specifications.

Can I use it for fuel or oil lines?

No. This hose is intended for coolant, water, and air applications and is also approved for marine use. Do not use it for fuel or oil transfer applications.

Should I replace the hose clamps too?

Gates recommends replacing the hose clamps each time a new coolant hose is installed to help ensure a proper seal.

Related Products

!