Coolant Bypass Hose for 1984 Chevrolet Impala & More - Gates 20521

$11.99

Vehicles this part fits

    Part number: 20521
    UPC: 072053051513
    Condition: New
    Weight: 0.10 LBS
    Item Package Quantity: 1
    $11.99
    Adding to cart… The item has been added

    Have questions?

    Gates Engine Coolant Bypass Hose P/N:20521
    Gates Engine Coolant Bypass Hose P/N:20521
    $11.99
    $11.99

    Gates 20521 coolant bypass hose for the 1984 Chevrolet Impala V6 3.8L and other vehicles carries engine coolant through the cooling system. It is a molded hose made for the engine's coolant bypass connection.

    • Specifically engineered materials that resist collapse under vacuum
    • Engineered to resist electrochemical degradation, the leading cause of hose failure
    • Pre-shaped for properly sealed connections
    • EPDM tube with synthetic fiber knit reinforcement and a heat-, ozone- and chemical coolant-resistant EPDM cover
    • Meets SAE 20R4 class D2 and DIN 73411 class A, except for tolerances
    • Temperature range of -40 °F to +257 °F (-40 °C to +125 °C)

    Quick facts

    • Part: Gates 20521 coolant bypass hose
    • Also called: engine coolant bypass hose
    • Fits: 1984 Chevrolet Impala V6 3.8L and other vehicles
    • Material: EPDM
    • Condition: New

    Coolant seepage at the hose ends, cracks or a soft, swollen cover can mean this hose is worn, though a loose clamp or a damaged connector can leak in much the same way, so find which one is at fault before replacing anything. Do any visual check with the engine off and cool.

    Fits

    It is listed for a wide range of Buick, Chevrolet, GMC, Jeep, Oldsmobile and Pontiac models, including the 1978-1982 Chevrolet Malibu V6 3.8L and the 1981 Chevrolet Camaro V6 3.8L, with one hose per vehicle.

    Specifications

    Fit and size

    • Quantity per vehicle: 1
    • Centerline length: 4.8 in (122 mm)
    • Inside diameter, both ends: 0.61 in (15 mm)

    Build and materials

    • Construction: molded
    • Material: EPDM
    • Condition: New
    • Country of origin: United States

    Installation notes

    • Replace the hose clamps each time a new coolant hose is installed.
    • Use only for coolant; not for fuel or oil transfer.

    Product information is for general reference and may contain errors. See our Disclaimer.

    Frequently Asked Questions

    Does the Gates 20521 coolant bypass hose fit the 1978-1982 Chevrolet Malibu V6 3.8L?

    Yes. Gates 20521 is listed for the 1978-1982 Chevrolet Malibu V6 3.8L, and one hose is used per vehicle. For any other car, look it up in the "Vehicles it fits" section of this page.

    What is the inside diameter of the Gates 20521 hose?

    Both ends of Gates 20521 have a 0.61 in (15 mm) inside diameter. The centerline length is 4.8 in (122 mm).

    Is this engine coolant bypass hose made of EPDM, and what temperatures does it handle?

    Yes. The tube and cover are EPDM, with synthetic fiber knit reinforcement. The temperature range is -40 °F to +257 °F (-40 °C to +125 °C).

    What does a worn Gates coolant bypass hose look like?

    Look for cracks, a soft or swollen cover, or damp coolant around the ends, checked with the engine off and cool. A shop can pressure-test the cooling system if you are unsure.

    Can I put the old clamps back on the Gates 20521 hose?

    No. Clamps should be replaced whenever a new coolant hose goes on, so plan on new ones. This hose is for coolant only, not for fuel or oil lines.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review