Gates EMH059 crankcase breather hose for the 2013-2019 Nissan Sentra 4-cylinder 1.8L connects the PCV valve to the intake. Also called a crankcase vent hose, this molded rubber hose carries crankcase vapors to the intake side.
- Molded rubber construction
- Resists fuel vapors and oil
- Meets SAE J30R7 specifications
- Temperature range of -40 °F to +275 °F (-40 °C to +135 °C)
Quick facts
- Part: Gates EMH059 crankcase breather hose
- Also called: crankcase vent hose
- Fits: 2013-2019 Nissan Sentra 4-cylinder 1.8L
- Position: PCV valve to intake
- Material: Rubber
- Condition: New
A cracked, swollen or oil-soaked hose, or a loose push-in end, can mean the hose is worn. A rough idle or an oil smell can have other causes, so before you replace the hose, look it over with the engine off and cool for cracks, soft spots and oil wetness.
Fits
This hose is a direct replacement for the 2013-2019 Nissan Sentra 4-cylinder 1.8L (engine code L4-1.8L), which takes one.
Specifications
Fit and size
- Position: PCV valve to intake
- Quantity per vehicle: 1
- Inside diameter: 10 mm (.38 in)
- Centerline length: 406 mm (16 in)
- End type: push in
Build and materials
- Material: Rubber
- Construction: molded
- Grade type: OE Exact
- Condition: New
- Country of origin: China
In the box
One crankcase breather hose. The PCV valve, protective sleeve and hardware are not included; plan on new fasteners rather than reusing old ones.
Installation notes
- The hose has push-in ends.
- The direct replacement design is made for easy installation.
Interchange: 118263RC1A
Product information is for general reference and may contain errors. See our Disclaimer.
Frequently Asked Questions
Does the Gates EMH059 crankcase breather hose fit the 2013-2019 Nissan Sentra 4-cylinder 1.8L?
Yes. Gates EMH059 is a direct replacement for the 2013-2019 Nissan Sentra 4-cylinder 1.8L (L4-1.8L), and the car takes one.
What are the inside diameter and length of the Gates EMH059 hose?
Gates EMH059 has a 10 mm (.38 in) inside diameter and a 406 mm (16 in) centerline length. It is a molded rubber hose with push-in ends.
Does this crankcase breather hose come with a PCV valve?
No. This listing is one hose; the PCV valve, protective sleeve and hardware are not included.
What temperatures and fluids can this rubber breather hose handle?
It is rated from -40 °F to +275 °F (-40 °C to +135 °C), resists fuel vapors and oil, and meets SAE J30R7 specifications.
How can I tell if my crankcase breather hose is worn?
With the engine off and cool, look for cracks, swelling, soft spots or oil wetness along the hose and at its push-in ends. A shop can test the ventilation system if the symptoms continue.
