Gates Engine Auxiliary Water Pump,Engine Water Pump P/N:41504E
Gates 42180 water pump for the 2015-2019 Hyundai Sonata 4-cylinder 2.0L or 2.4L and other vehicles is a new pump that circulates coolant through the engine.
Coolant seeping near the pump, a squeal or grinding from the pump bearing, or an engine that runs hot can mean the water pump is worn, though a stuck thermostat or a loose accessory belt can be behind the same signs.
This water pump is listed for a wide range of Hyundai and Kia models, including the 2016-2019 Kia Optima 4-cylinder 2.0L, the 2016-2020 Optima 4-cylinder 2.4L and the 2016-2018 Kia Sorento 4-cylinder 2.0L or 2.4L. It is built to fit and perform to OE specifications. This listing is one pump, and the 2015-2019 Hyundai Sonata 4-cylinder 2.0L or 2.4L takes one. If your car is not named here, look up its year, model and engine in the "Vehicles it fits" section.
Fit and size
Build and materials
One water pump, two gaskets and one seal. The pulley, fan clutch, back housing, and thermostat and housing are not included.
Interchange: AWP-2121
WPK823 · T1222 · W2782M · 251002GTC0 · 251102GTA0 · 251102GTC0 · QPW62 · CP6220 · US8163 · 942180
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this the right water pump for a 2015-2019 Hyundai Sonata 4-cylinder 2.0L or 2.4L?
Yes. Gates 42180 is listed for the 2015-2019 Hyundai Sonata with either the 4-cylinder 2.0L or 2.4L engine, and the Sonata takes one pump. For another car, use the "Vehicles it fits" section.
Does the Gates 42180 work as a water pump for the 2016-2018 Kia Sorento 4-cylinder 2.0L or 2.4L?
Yes. Gates 42180 is listed for both the 2.0L and 2.4L 4-cylinder engines of the 2016-2018 Kia Sorento, and each of those engines takes one pump.
Does the Gates engine water pump come with a pulley?
No. The pulley is not included, and neither are the fan clutch, back housing, or thermostat and housing. The box holds the water pump, two gaskets and a seal.
Is the impeller on this water pump plastic or metal?
The impeller is plastic and the housing is cast aluminum. This pump is driven by the accessory belt, not the timing belt.
What tests does each Gates 42180 pump go through?
Every Gates 42180 pump has its seals and bearings put through a 100 percent functional test. The casting and the fully assembled pump are each leak-tested at 100 percent too.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.