Gates 42592HD water pump for the 2005-2008 Volvo VHD 6-cylinder 12.1L and other vehicles circulates coolant through the engine. This engine water pump is designed for severe, rigorous conditions.
- Gates Heavy-Duty water pump line, shown by the HD suffix in the part number
- Unitized bearings and seals, each 100 percent tested
- 100 percent leakage test on both the casting and the assembled pump
- Computerized machined surfaces for proper fit and sealing
- Cast iron housing with a plastic impeller
Quick facts
- Part: Gates 42592HD water pump
- Also called: engine water pump
- Fits: 2005-2008 Volvo VHD 6-cylinder 12.1L and other vehicles
- Material: Cast iron housing, plastic impeller
- Condition: New
A wearing water pump can show up as coolant leaking near the pump, a grinding or whining noise from the pump, or an engine that runs hot. Before you replace the pump, rule out a leaking hose, a stuck thermostat or a slipping belt, since each of those can also cause overheating or a coolant leak.
Fits
This pump fits the 2005-2008 Volvo VHD 6-cylinder 12.1L, the 2005-2008 Volvo VNL 6-cylinder 12.1L and the 2005-2008 Volvo VNM 6-cylinder 12.1L, and a single pump goes on each.
Specifications
Fit and size
- Quantity per application: 1
- Drive type: accessory belt
- Pulley: included
Build and materials
- Housing material: cast iron
- Impeller material: plastic
- Impeller rotation: reverse
- Condition: new
- Warranty: Gates, 18 months or 150,000 miles/5,400 hours, whichever comes first
- Country of origin: China
In the box
One water pump with its pulley and 2 seals. The fan clutch, back housing, thermostat and thermostat housing are not included.
Interchange: US16002 · 20734268 · 942592HD
This part cross-references / interchanges with the following part numbers:
42592HD, US16002, 20734268, 942592HD
Frequently Asked Questions
Is this a water pump for the 2005-2008 Volvo VNL 6-cylinder 12.1L?
Yes. Gates 42592HD fits the 2005-2008 Volvo VNL 6-cylinder 12.1L, and one pump goes on that engine.
Does the Gates 42592HD come with the pulley and seals?
Yes. The listing includes the water pump, its pulley and 2 seals. The fan clutch, back housing, thermostat and thermostat housing are not included.
Is this Gates water pump built for heavy-duty use?
Yes. It belongs to the Gates Heavy-Duty line, designed for severe and rigorous conditions, with a cast iron housing and a plastic impeller.
Is this Gates pump timing belt driven?
No. This pump is driven by the accessory belt, not a timing belt, and the pulley is included.
How can I tell if a coolant leak is coming from the pump's seals?
With the engine off and cool, look for coolant residue around the pump, and notice any grinding or whining noise while driving. A shop can pressure-test the cooling system to confirm.
