Gates 44037 water pump for the 1993-1997 Chevrolet Camaro V8 5.7L and other vehicles circulates coolant through the engine to carry heat away from it. This new engine water pump fits and performs exactly to OE specifications and requirements.
- Cast aluminum housing with a stamped steel impeller
- 100 percent functional test of the seals and bearings
- 100 percent leakage test of the casting and the fully assembled water pump
- Four outlets and accessory belt drive
Quick facts
- Part: Gates 44037 water pump
- Also called: engine water pump
- Fits: 1993-1997 Chevrolet Camaro V8 5.7L and other vehicles
- Material: Cast aluminum housing, stamped steel impeller
- Condition: New
A coolant leak at the pump, a whine or grinding from the bearing, or an engine that runs hot can mean the pump is wearing out. These signs alone do not prove the pump is at fault, since a stuck thermostat can also make an engine overheat, so find the cause before replacing it.
Fits
It fits the 1993-1997 Chevrolet Camaro V8 5.7L and the 1993-1997 Pontiac Firebird V8 5.7L, and both take one.
Specifications
Fit and size
- Quantity per vehicle: 1
- Outlet quantity: 4
- Drive: accessory belt, not timing belt driven
Build and materials
- Housing material: cast aluminum
- Impeller material: stamped steel
- Impeller rotation: standard
- Condition: New
- Warranty: Gates limited lifetime warranty
- Country of origin: China
In the box
One water pump, two gaskets and one seal. The pulley, back housing, thermostat and housing, and fan clutch are not included.
Frequently Asked Questions
Is the Gates 44037 the right pump for the 1993-1997 Pontiac Firebird V8 5.7L?
Yes. The Gates 44037 water pump fits the 1993-1997 Pontiac Firebird V8 5.7L, and it also fits the 1993-1997 Chevrolet Camaro V8 5.7L.
Do gaskets come with the Gates 44037 water pump?
Yes. The box holds the water pump, two gaskets and a seal. The pulley, back housing, thermostat and housing, and fan clutch are not included.
Is this water pump driven by the accessory belt or the timing belt?
This water pump is driven by an accessory belt. It is not timing belt driven.
What are the housing and impeller of this water pump made of?
The housing is cast aluminum and the impeller is stamped steel.
Which factory tests does this Gates water pump go through?
Seals and bearings get a 100 percent functional test. The casting and the fully assembled pump each get a 100 percent leakage test.
