Gates HVAC Heater Hose P/N:12256
Gates 12057 heater hose for the 2009-2010 Dodge Journey V6 3.5L carries engine coolant on the oil cooler to pipe run. This Gates molded heater hose, also called an HVAC heater hose, is sold as one hose.
Coolant seepage at the hose ends, cracks, or swollen or soft rubber can mean a heater hose is wearing out. These signs alone do not prove the hose is the problem, since a loose clamp at the connection can leak the same way. Look it over with the engine off and cool.
This is a direct-fit heater hose replacement for the 2009-2010 Dodge Journey V6 3.5L, which takes one.
Fit and size
Build and materials
Interchange: 14882S · 5058545AC · 13057
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this the 2009-2010 Dodge Journey V6 3.5L heater hose?
Yes. Gates 12057 is listed for the 2009-2010 Dodge Journey V6 3.5L, and that engine takes one hose.
What size is the Gates heater hose 12057?
Both ends have a 0.59 in (15 mm) inside diameter, and the centerline length is 12.98 in (330 mm).
Can this heater hose be used for fuel or oil lines?
No. It is not for fuel or oil transfer applications. It is made for coolant, water and air, and is also approved for marine use.
What signs show a molded EPDM heater hose is wearing out?
With the engine off and cool, look for coolant seepage at the ends, cracks, or swollen or soft rubber. A shop can pressure test the cooling system.
Should I reuse the old clamps with Gates 12057?
No. Replace the hose clamps whenever a new coolant hose such as Gates 12057 is installed.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.