Heater Hose for 2008-2013 Mitsubishi Outlander & More - Gates 12063

$14.99

Vehicles this part fits

    Part number: 12063
    UPC: 770075604075
    Condition: New
    Weight: 0.29 LBS
    Item Package Quantity: 1
    $14.99
    Adding to cart… The item has been added

    Have questions?

    Gates HVAC Heater Hose P/N:12063
    Gates HVAC Heater Hose P/N:12063
    $14.99
    $14.99

    Gates 12063 heater hose for the 2008-2013 Mitsubishi Outlander 4-cylinder 2.4L and other vehicles carries engine coolant to the heater circuit. This Gates molded heater hose, also called an HVAC heater hose, sits at the throttle body outlet.

    • Factory-molded shape for today's smaller, tighter engine compartments
    • Gates Small I.D. Molded Coolant Hose line, usable for coolant, water and air and approved for marine applications
    • Engineered to resist electrochemical degradation, the leading cause of hose failure
    • EPDM tube, synthetic fiber knit reinforcement and EPDM cover
    • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
    • Temperature range of -40 °F to 275 °F (-40 °C to 135 °C)

    Quick facts

    • Part: Gates 12063 heater hose
    • Also called: HVAC heater hose
    • Fits: 2008-2013 Mitsubishi Outlander 4-cylinder 2.4L and other vehicles
    • Position: Throttle body outlet
    • Material: EPDM
    • Condition: New

    A worn heater hose can show cracks, a soft or swollen section, coolant seepage, a sweet coolant smell or a dropping coolant level. Before you replace the hose, rule out a loose clamp or a leak elsewhere in the cooling system, since those can look the same. Inspect only with the engine off and cool.

    Fits

    It fits the 2008-2013 Mitsubishi Outlander 4-cylinder 2.4L, the 2011-2012 Mitsubishi Outlander Sport 4-cylinder 2.0L and the 2011-2012 Mitsubishi RVR 4-cylinder 2.0L, with one hose needed on each car.

    Specifications

    Fit and size

    • Position: throttle body outlet
    • Quantity per vehicle: 1
    • Centerline length: 9.85 in (250 mm)
    • Inside diameter, both ends: 0.31 in (8 mm)

    Build and materials

    • Material: EPDM
    • Construction: molded
    • Condition: new
    • Country of origin: United States

    Installation notes

    • Replace the hose clamps whenever a new coolant hose is installed.
    • Not for fuel or oil transfer applications.

    Interchange: 14884S · F10514 · 1310A361 · 13063

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    14884S, 12063, F10514, 1310A361, 13063

    Frequently Asked Questions

    Is this Gates heater hose right for the 2011-2012 Mitsubishi RVR 4-cylinder 2.0L?

    Yes. Gates 12063 fits the 2011-2012 Mitsubishi RVR 4-cylinder 2.0L, and that car takes one hose.

    What length and inside diameter does the Gates 12063 hose have?

    Gates 12063 has a centerline length of 9.85 in (250 mm). Both ends have an inside diameter of 0.31 in (8 mm).

    What SAE specification does this EPDM hose meet?

    It meets SAE 20R3 Type EC Class D-1 and D-2. Its temperature range is -40 °F to 275 °F (-40 °C to 135 °C).

    Can I use this molded hose for a fuel or oil line?

    No. It is for coolant, water and air applications, and it is also approved for marine use. Do not use it for fuel or oil transfer.

    Can I reuse my old clamps when fitting this heater hose?

    No. Replace the hose clamps each time a new coolant hose is installed.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review