Heater Hose for 1999-2004 Nissan Frontier & More - Gates 18460

$22.99

Vehicles this part fits

    Part number: 18460
    UPC: 072053510645
    Condition: New
    Weight: 0.11 LBS
    Item Package Quantity: 1
    $22.99
    Adding to cart… The item has been added

    Have questions?

    Gates HVAC Heater Hose P/N:18460
    Gates HVAC Heater Hose P/N:18460
    $22.99
    $22.99

    Gates 18460 heater hose for the 1999-2004 Nissan Frontier V6 3.3L and other vehicles carries engine coolant between connection points in the cooling system. This Gates molded heater hose is factory-molded in an OEM style to fit today's smaller, tighter engine compartments.

    • Part of the Gates Small I.D. Molded Coolant Hose line, made for tight engine compartments
    • EPDM tube and cover with synthetic fiber knit reinforcement
    • Engineered to resist electrochemical degradation, the leading cause of hose failure
    • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
    • Temperature range of -40 °F to 275 °F (-40 °C to 135 °C)
    • Usable for coolant, water and air applications, and approved for marine applications

    Quick facts

    • Part: Gates 18460 heater hose
    • Also called: HVAC heater hose
    • Fits: 1999-2004 Nissan Frontier V6 3.3L and other vehicles
    • Position: Throttle body to pipe, intake manifold to throttle body, throttle body to intake manifold, pipe-4 to thermostat
    • Material: EPDM
    • Condition: New

    Coolant seeping at a joint, a cracked, soft or swollen hose, or a coolant smell with a dropping level can mean the HVAC heater hose is wearing out. Loose clamps, a sticking thermostat or another leaking coolant part can be behind these signs as well, so find the source of the leak before ordering. Inspect the hose only with the engine off and cool.

    Fits

    The 1999-2004 Nissan Frontier V6 3.3L, the 1996-2000 Nissan Pathfinder V6 3.3L and the 2000-2004 Nissan Xterra V6 3.3L are among the vehicles this Gates heater hose fits, and it fits others too. If your car is not named here, look up its year and engine in the "Vehicles it fits" section.

    Specifications

    Fit and size

    • Position: Throttle body to pipe, intake manifold to throttle body, throttle body to intake manifold, pipe-4 to thermostat
    • Quantity per vehicle: 1
    • End 1 inside diameter: 13 mm (0.5 in)
    • End 2 inside diameter: 13 mm (0.5 in)
    • Centerline length: 170 mm (6.7 in)
    • Branches: 0; quick-connect fittings: 0

    Build and materials

    • Construction: Molded
    • Material: EPDM
    • Reinforcement: Synthetic fiber knit
    • Condition: New
    • Country of origin: United States

    In the box

    This listing holds one heater hose, and the vehicle takes one.

    Installation notes

    • Hose clamps should be replaced each time a new coolant hose is installed.
    • Not for fuel or oil transfer applications.

    Interchange: 14250S · 64333 · A91035 · 140560W000 · 140564S100 · 80230 · 10460 · 1629550040

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    14250S, 18460, 64333, A91035, 140560W000, 140564S100, 80230, 10460, 1629550040

    Frequently Asked Questions

    Is this a heater hose for the 2000-2004 Nissan Xterra V6 3.3L?

    Yes, Gates 18460 fits the 2000-2004 Nissan Xterra V6 3.3L, which takes one hose. For another car, look up its year and engine in the "Vehicles it fits" section.

    Is Gates 18460 the right heater hose for a 1999-2004 Nissan Frontier V6 3.3L?

    Yes. Gates 18460 is listed for the 1999-2004 Nissan Frontier V6 3.3L, which takes one hose.

    Is Gates 18460 a 1/2 inch heater hose?

    Yes. This heater hose has a 13 mm (0.5 in) inside diameter at both ends and a centerline length of 170 mm (6.7 in).

    Can this heater hose be used on a fuel or oil line?

    No. It is not for fuel or oil transfer. It is made for coolant, water and air applications, and it is also approved for marine applications.

    Should the hose clamps be replaced along with this heater hose?

    Yes. New clamps are advised with any new coolant hose.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review