Heater Hose for 1998-2001 Toyota Camry - Gates 18384

$15.99

Vehicles this part fits

    Part number: 18384
    UPC: 770075528722
    Condition: New
    Weight: 0.12 LBS
    Item Package Quantity: 1
    $15.99
    Adding to cart… The item has been added

    Have questions?

    Gates HVAC Heater Hose P/N:18384
    Gates HVAC Heater Hose P/N:18384
    $15.99
    $15.99

    Gates 18384 heater hose for the 1998-2001 Toyota Camry 4-cylinder 2.2L carries engine coolant between the throttle body and a pipe. This Gates heater hose is molded to shape.

    • Gates Small I.D. Molded Coolant Hose line, factory-molded for smaller, tighter engine compartments
    • EPDM tube and cover with synthetic fiber knit reinforcement
    • Engineered to resist electrochemical degradation, the leading cause of hose failure
    • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
    • Temperature range of -40 Deg. F to 275 Deg. F (-40 Deg. C to 135 Deg. C)
    • Used for coolant, water and air, and approved for marine applications

    Quick facts

    • Part: Gates 18384 heater hose
    • Also called: HVAC heater hose
    • Fits: 1998-2001 Toyota Camry 4-cylinder 2.2L
    • Position: Throttle body to pipe
    • Material: EPDM
    • Condition: New

    A cracked or swollen hose, or coolant seeping at the ends, can mean a heater hose is wearing out. Before you replace this hose, rule out a loose clamp or a leak at a nearby connection, since coolant loss has more than one possible source. Do not use it for fuel or oil transfer.

    Fits

    This listing is a direct-fit replacement for the 1998-2001 Toyota Camry 4-cylinder 2.2L, which takes one hose.

    Specifications

    Fit and size

    • Position: throttle body to pipe
    • Quantity per vehicle: 1
    • Centerline length: 272 mm (10.7 in)
    • End 1 inside diameter: 8 mm (0.32 in)
    • End 2 inside diameter: 8 mm (0.32 in)

    Build and materials

    • Material: EPDM
    • Reinforcement: synthetic fiber knit
    • Construction: molded
    • Condition: New
    • Country of origin: United States

    Installation notes

    • Replace the hose clamps each time a new coolant hose is installed.

    Interchange: 14665S · F10746 · 10384 · 1628303030

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    14665S, 18384, F10746, 10384, 1628303030

    Frequently Asked Questions

    Is Gates 18384 the right heater hose for a 1998-2001 Toyota Camry 4-cylinder 2.2L?

    Yes. Gates 18384 is listed for the 1998-2001 Toyota Camry 4-cylinder 2.2L, which takes one hose. It sits between the throttle body and a pipe.

    What size is the Gates 18384 heater hose?

    Centerline length is 272 mm (10.7 in), and both ends have an 8 mm (0.32 in) inside diameter. The hose is molded and has no branches.

    Can this HVAC heater hose carry anything besides coolant?

    Yes. It can be used for coolant, water and air, and it is approved for marine applications. It must not be used for fuel or oil transfer.

    What temperature range and SAE rating does the Gates 18384 cover?

    The Gates 18384 handles -40 Deg. F to 275 Deg. F (-40 Deg. C to 135 Deg. C). It meets SAE 20R3 Type EC Class D-1 and D-2 specifications.

    Should I replace the hose clamps when I install this Gates molded heater hose?

    Yes. Hose clamps should be replaced each time a new coolant hose is installed.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review