Gates HVAC Heater Hose P/N:23855
Gates 12129 heater hose for the 2006-2010 Mazda 5 4-cylinder 2.3L carries coolant on the reservoir-to-filler-neck run. As a Gates molded heater hose, it is factory-molded in an OEM style to suit today's smaller, tighter-fitting engine compartments.
Cracks, a soft or swollen spot, or coolant stains on the hose can mean it is wearing out. These signs alone do not prove this hose is the problem; a loose clamp is another common source of a coolant leak.
This listing is one hose, a direct-fit replacement for the 2006-2010 Mazda 5 4-cylinder 2.3L, which takes one hose.
Fit and size
Build and materials
Interchange: 16703M · LFB715381A · LFB715381B · 13129
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Gates 12129 heater hose fit the 2006-2010 Mazda 5 4-cylinder 2.3L?
Yes. Gates 12129 is a heater hose for the 2006-2010 Mazda 5 4-cylinder 2.3L, and that car takes one.
Is this HVAC heater hose approved for marine use?
Yes. The molded hose is approved for marine applications, and it can also be used for coolant, water and air applications.
Is this a 1/4 inch heater hose from Gates?
Yes. Gates 12129 has a 0.25 in (6 mm) inside diameter at both ends and a centerline length of 13.54 in (344 mm).
Do I need new clamps with this molded hose?
Yes. Hose clamps should be replaced each time a new coolant hose is installed.
Is LFB715381A a cross-reference for this heater hose?
Yes. LFB715381A is a listed interchange number for Gates 12129, so it can be used to match this hose to an older part number.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.