Heater Hose for 2006-2008 Dodge Charger & More - Gates 19843

$24.99

Vehicles this part fits

    Part number: 19843
    UPC: 770075304135
    Condition: New
    Weight: 0.72 LBS
    Item Package Quantity: 1
    $24.99
    Adding to cart… The item has been added

    Have questions?

    Gates HVAC Heater Hose P/N:19843
    Gates HVAC Heater Hose P/N:19843
    $24.99
    $24.99

    Gates 19843 heater hose for the 2006-2008 Dodge Charger V6 3.5L and other vehicles carries engine coolant in the heater circuit of the cooling system. This Gates molded heater hose is listed for the heater to pipe-2 position.

    • Gates Small I.D. Molded Coolant Hose line, factory-molded for smaller, tighter engine compartments
    • Usable for coolant, water and air, and approved for marine applications
    • Engineered to resist electrochemical degradation, the leading cause of hose failure
    • EPDM tube, synthetic fiber knit reinforcement and EPDM cover
    • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
    • Temperature range: -40 °F to 275 °F (-40 °C to 135 °C)

    Quick facts

    • Part: Gates 19843 heater hose
    • Also called: HVAC heater hose
    • Fits: 2006-2008 Dodge Charger V6 3.5L and other vehicles
    • Position: Heater to pipe-2
    • Material: EPDM
    • Condition: New

    Coolant leaking at the hose, a soft, swollen or cracked hose, or a heater that blows cool air can mean this hose is worn, though a faulty thermostat or a clogged heater core can sit behind weak heat too, so find the cause before replacing the hose.

    Fits

    This is a heater hose for the 2005-2008 Chrysler 300 V6 3.5L, and it also fits the 2005-2008 Dodge Magnum V6 3.5L and the 2006-2008 Dodge Charger V6 3.5L. These cars take one hose, and this listing is a single hose.

    Specifications

    Fit and size

    • Position: Heater to pipe-2
    • Centerline length: 16.8 in (427 mm)
    • End 1 inside diameter: 0.75 in (19 mm)
    • End 2 inside diameter: 0.75 in (19 mm)
    • Quantity per vehicle: 1

    Build and materials

    • Material: EPDM
    • Construction: molded
    • Condition: New
    • Country of origin: United States

    Installation notes

    • Replace the hose clamps each time a new coolant hose is installed.
    • Not for fuel or oil transfer applications.

    Interchange: 16416M · 4596596AC · D90889 · 11843

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    16416M, 19843, 4596596AC, D90889, 11843

    Frequently Asked Questions

    Is Gates 19843 a heater hose for the 2006-2008 Dodge Charger V6 3.5L?

    Yes. Gates 19843 fits the 2006-2008 Dodge Charger V6 3.5L in the heater to pipe-2 position, and that car takes one hose.

    Is this Gates 3/4 heater hose the same size on both ends?

    Yes. Gates 19843 has a 0.75 in (19 mm) inside diameter on both ends and a centerline length of 16.8 in (427 mm).

    Can Gates 19843 be used for water or air as well as coolant?

    Yes. This hose handles coolant, water and air and is approved for marine applications, but it is not for fuel or oil transfer.

    What temperature range does this HVAC heater hose cover?

    It covers -40 °F to 275 °F (-40 °C to 135 °C). The EPDM hose meets SAE 20R3 Type EC Class D-1 and D-2.

    Do I need new hose clamps when installing Gates 19843?

    Yes. Replace the hose clamps each time a new coolant hose is installed.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review