Heater Hose for 2014 Ram 2500 & More - Gates 12168

$45.99

Vehicles this part fits

    Part number: 12168
    UPC: 770075712848
    Condition: New
    Weight: 0.68 LBS
    Item Package Quantity: 1
    $45.99
    Adding to cart… The item has been added

    Have questions?

    Gates HVAC Heater Hose P/N:12168
    Gates HVAC Heater Hose P/N:12168
    $45.99
    $45.99

    Gates 12168 heater hose for the 2014 Ram 2500 6-cylinder 6.7L and other vehicles carries hot engine coolant to and from the cabin heater. It is made for the heater outlet and sold as a single hose.

    • Factory-molded shape made for smaller, tighter engine compartments
    • Handles coolant, water and air, and is approved for marine applications
    • Engineered to resist electrochemical degradation, a leading cause of hose failure
    • EPDM tube, synthetic fiber knit reinforcement and EPDM cover
    • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
    • Temperature range of -40 °F to 275 °F (-40 °C to 135 °C)

    Quick facts

    • Part: Gates 12168 heater hose
    • Also called: HVAC heater hose
    • Fits: 2014 Ram 2500 6-cylinder 6.7L and other vehicles
    • Position: Heater outlet
    • Material: EPDM, plastic
    • Condition: New

    Coolant drips at the hose, a cracked, soft or swollen hose, or a heater that stays cool can mean the hose is failing. Inspect it only with the engine off and cool. Before you replace the hose, rule out a loose clamp, a leaking heater core or a worn fitting at either end, since each of those can leak coolant as well.

    Fits

    The hose is listed for a wide range of Ram models, led by the 2014 Ram 2500 6-cylinder 6.7L, the 2014 Ram 3500 6-cylinder 6.7L and the 2014 Ram 4500 6-cylinder 6.7L. If your truck is not named here, look it up in the "Vehicles it fits" section on this product page. The 2014 Ram 2500 6-cylinder 6.7L takes one.

    Specifications

    Fit and size

    • Position: Heater outlet
    • Quantity per vehicle: 1
    • Centerline length: 19.34 in (491 mm)
    • End 1 inside diameter: 0.62 in (16 mm)
    • End 2 inside diameter: 0.62 in (16 mm)

    Build and materials

    • Construction: Molded
    • Material: EPDM, plastic
    • Condition: New
    • Country of origin: United States

    Installation notes

    • Replace the hose clamps each time a new coolant hose is installed.
    • Do not use this hose for fuel or oil transfer.

    Interchange: 16710M · 68213155AB · 68213155AC · 13168

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    16710M, 68213155AB, 68213155AC, 13168

    Frequently Asked Questions

    Does the Gates 12168 heater hose fit the 2014 Ram 3500 6-cylinder 6.7L?

    Yes. Gates 12168 is listed for the 2014 Ram 3500 6-cylinder 6.7L and for other Ram models. Look up your own truck in the "Vehicles it fits" section.

    What size is this HVAC heater hose?

    Gates 12168 measures 19.34 inches (491 mm) along the centerline, with a 0.62 inch (16 mm) inside diameter at both ends.

    Is the Gates molded heater hose approved for marine use?

    Yes. It is approved for marine applications and can carry coolant, water and air. It is not for fuel or oil transfer.

    What temperature range can this EPDM heater hose handle?

    The hose is rated from -40 °F to 275 °F (-40 °C to 135 °C). It also conforms to SAE 20R3 Type EC, Class D-1 and D-2.

    Do I need new hose clamps with the Gates 12168 hose?

    Yes. Hose clamps should be replaced each time a new coolant hose is installed, so plan on fresh clamps for this hose.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review