Gates HVAC Heater Hose P/N:18460
Gates 12212 heater hose for the 2015-2020 Honda Fit 4-cylinder 1.5L and other vehicles carries engine coolant to and from the heater. This Gates molded heater hose is factory-molded to fit smaller, tighter engine compartments.
Coolant seepage at the hose, a swollen or cracked hose body or weak cabin heat can be signs of a worn heater hose. Weak heat alone does not prove the hose is at fault, since low coolant is another common cause.
This hose fits the 2015-2020 Honda Fit 4-cylinder 1.5L and the 2015-2021 Honda City 4-cylinder 1.5L. Both take one, and the listing is a single hose.
Fit and size
Build and materials
Interchange: 14927S · F11909 · 79725T5B000 · 13212
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is the Gates heater hose 12212 right for the 2015-2021 Honda City 4-cylinder 1.5L?
Yes. Gates 12212 fits the 2015-2021 Honda City 4-cylinder 1.5L, and the car takes one hose in the heater outlet position.
What size is this HVAC heater hose?
Gates 12212 has a 16 mm (0.63 in) inside diameter at both ends and a centerline length of 416 mm (16.39 in).
What is this heater hose made of, and how hot can it get?
The tube and cover are EPDM, with a synthetic fiber knit reinforcement. It is rated from -40°F to 275°F (-40°C to 135°C).
Do I need new clamps with a new heater hose?
Yes, replace the hose clamps whenever a new heater hose goes on. Gates 12212 is sold as a single hose.
Can this molded heater hose be used on a fuel or oil line?
No. This heater hose is not for fuel or oil transfer applications; it is made for coolant, water and air.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.