Gates HVAC Heater Hose P/N:18460
Gates 12220 heater hose for the 2016-2018 Kia Sorento 4-cylinder 2.0L carries engine coolant for the cabin heating system. Also known as an HVAC heater hose, this Gates heater hose sits at the heater outlet.
A heater hose that is cracked, swollen, soft or damp at the ends can show up as a coolant smell, a low reservoir or weak cabin heat. Those signs can have other causes, so look the hose over with the engine off and cool, and find where a leak starts before you replace anything. This listing is one hose, and the 2016-2018 Kia Sorento 4-cylinder 2.0L takes one.
This is a direct-fit heater hose for the 2016-2018 Kia Sorento 4-cylinder 2.0L.
Fit and size
Build and materials
One heater hose.
Interchange: 16727M · F10539 · 97312C5600 · 13220
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Gates 12220 heater hose fit the 2016-2018 Kia Sorento 4-cylinder 2.0L?
Yes. Gates 12220 is a heater outlet hose for the 2016-2018 Kia Sorento 4-cylinder 2.0L, and that engine takes one.
Can this Gates molded heater hose be used on a boat?
Yes. This hose is approved for marine applications and can carry coolant, water and air.
What are the inside diameters of this heater hose?
Gates 12220 measures 0.72 in (18 mm) at End 1 and 0.82 in (21 mm) at End 2, with a centerline length of 15.97 in (406 mm).
Can I use this heater hose for fuel or oil lines?
No. This hose is for coolant, water and air, and it is not for fuel or oil transfer.
Should I put new clamps on when I install this heater hose?
Yes. Replacing the hose clamps each time a new heater hose is installed is recommended.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.