Heater Hose for 2010-2018 Lexus GX460 - Gates 12263

$44.99

Vehicles this part fits

    Part number: 12263
    UPC: 770075743019
    Condition: New
    Weight: 0.20 LBS
    Item Package Quantity: 1
    $44.99
    Adding to cart… The item has been added

    Have questions?

    Gates HVAC Heater Hose P/N:12263
    Gates HVAC Heater Hose P/N:12263
    $44.99
    $44.99

    Gates 12263 heater hose for the 2010-2018 Lexus GX460 V8 4.6L carries coolant between the heater and its pipe on the inlet side. This Gates heater hose can be used for coolant, water and air applications.

    • Small I.D. molded coolant hose, factory-molded for smaller, tighter engine compartments
    • EPDM tube, synthetic fiber knit reinforcement and EPDM cover
    • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
    • Temperature range of -40 Deg. F to 275 Deg. F (-40 Deg. C to 135 Deg. C)
    • Engineered to resist electrochemical degradation, the leading cause of hose failure

    Quick facts

    • Part: Gates 12263 heater hose
    • Also called: HVAC heater hose
    • Fits: 2010-2018 and 2020-2021 Lexus GX460 V8 4.6L
    • Position: Heater inlet, heater to pipe (inlet)
    • Material: EPDM
    • Condition: New

    A hose that is cracked, soft, swollen or leaking coolant at the ends can be worn out, and weak heat from the vents can show up with a failing hose too. These signs alone do not prove the hose is at fault; a low coolant level is another common cause. Look at the hose only with the engine off and cool. This listing is one hose, and the heater inlet takes one.

    Fits

    It fits the 2010-2018 and 2020-2021 Lexus GX460 V8 4.6L.

    Specifications

    Fit and size

    • Position: Heater inlet, heater to pipe (inlet)
    • Quantity per vehicle: 1
    • Centerline length: 10.03 in (255 mm)
    • Inside diameter, both ends: .62 in (16 mm)

    Build and materials

    • Type: Molded
    • Material: EPDM
    • Reinforcement: synthetic fiber knit
    • Standard: SAE 20R3 Type EC Class D-1 and D-2
    • Temperature range: -40 Deg. F to 275 Deg. F (-40 Deg. C to 135 Deg. C)
    • Condition: New
    • Country of origin: United States

    Installation notes

    • Replace the hose clamps each time a new coolant hose is installed.
    • Do not use for fuel or oil transfer applications.

    Interchange: 14942S · 13263 · 8724560J50

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    14942S, 12263, 13263, 8724560J50

    Frequently Asked Questions

    Does the Gates 12263 heater hose fit the 2010-2018 Lexus GX460 V8 4.6L?

    Yes. Gates 12263 fits the 2010-2018 Lexus GX460 V8 4.6L and the 2020-2021 Lexus GX460 V8 4.6L. It goes on the heater inlet, heater to pipe.

    What size is the Gates 12263 heater hose?

    Gates 12263 has a centerline length of 10.03 in (255 mm) and an inside diameter of .62 in (16 mm) at both ends.

    Is this Gates molded heater hose approved for marine use?

    Yes. This hose is approved for marine applications, in addition to coolant, water and air applications.

    What temperature range does this HVAC heater hose handle?

    This hose has a temperature range of -40°F to 275°F (-40°C to 135°C) and meets SAE 20R3 Type EC Class D-1 and D-2 specifications.

    Does Gates 12263 replace part number 14942S?

    Yes. 14942S is listed as an interchange number for the Gates 12263 heater hose, along with 13263 and 8724560J50.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review