Gates HVAC Heater Hose P/N:12015
Gates 12355 heater hose for the 2014-2016 Toyota Sienna carries engine coolant to the heater in a factory-molded shape.
Coolant seeping from the hose, cracks along its length or a sweet coolant smell can mean this heater hose is worn, though a loose hose clamp or a leaking water pump can be behind them too, so find the leak's true source before replacing the hose.
It's a direct-fit replacement for the 2014-2016 Toyota Sienna, routed from tee-2 to the heater.
Interchange: 14976S · F10589 · 13355 · 8724508290
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Will the Gates 12355 heater hose fit a 2014-2016 Toyota Sienna?
Yes. The Gates 12355 heater hose is a direct-fit replacement for the 2014-2016 Toyota Sienna, in the tee-2 to heater position.
Is this Gates HVAC heater hose approved for marine use?
Yes. This heater hose is approved for marine applications and can also be used for coolant, water and air applications.
What temperature range is the Gates 12355 hose rated for?
The Gates 12355 heater hose is rated from -40 Deg. F to 275 Deg. F (-40 Deg. C to 135 Deg. C) and meets SAE 20R3 Type EC Class D-1 and D-2 specifications.
How can I tell an EPDM heater hose like this one is going bad?
A soft, spongy feel, bulging near the ends or surface cracks on this heater hose can mean it is worn; look it over and feel it only with the engine off and cool.
Should I fit new clamps when installing this molded hose?
Yes. Replace the hose clamps each time a new coolant hose like this molded heater hose is installed, rather than reusing the old clamps.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.