Heater Hose for 2004-2008 Suzuki Forenza & More - Gates 19601

$20.99

Vehicles this part fits

    Part number: 19601
    UPC: 072053178333
    Condition: New
    Weight: 0.48 LBS
    Item Package Quantity: 1
    $20.99
    Adding to cart… The item has been added

    Have questions?

    Gates HVAC Heater Hose P/N:19601
    Gates HVAC Heater Hose P/N:19601
    $20.99
    $20.99

    Gates 19601 heater hose for the 2004-2008 Suzuki Forenza 4-cylinder 2.0L and other vehicles carries engine coolant to and from the heater. This Gates molded heater hose, also called an HVAC heater hose, is made for the heater-to-pipe and reservoir-to-pipe positions.

    • Gates Small I.D. Molded Coolant Hose line, factory-molded for smaller, tighter engine compartments
    • EPDM tube, synthetic fiber knit reinforcement and EPDM cover
    • Engineered to resist electrochemical degradation, the leading cause of hose failure
    • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
    • Temperature range of -40 °F to 275 °F (-40 °C to 135 °C)
    • Used for coolant, water and air applications; also approved for marine use

    Quick facts

    • Part: Gates 19601 heater hose
    • Also called: HVAC heater hose
    • Fits: 2004-2008 Suzuki Forenza 4-cylinder 2.0L and other vehicles
    • Position: Heater to pipe-1, heater to pipe-2, reservoir to pipe-1
    • Material: EPDM
    • Condition: New

    A hose that is cracked, swollen or weeping coolant at the ends may be due for replacement; look it over only when the engine is cool. Before you replace the hose, rule out a loose clamp, a leak at the pipe connection or another source of coolant loss, since the cause may not be the hose.

    Fits

    The 2004-2008 Suzuki Forenza 4-cylinder 2.0L, the 2005-2008 Suzuki Reno 4-cylinder 2.0L and the 2004-2007 Chevrolet Optra 4-cylinder 2.0L all fit this hose, along with other vehicles, and each takes one.

    Specifications

    Fit and size

    • Position: heater to pipe-1, heater to pipe-2, reservoir to pipe-1
    • Quantity per vehicle: 1
    • Centerline length: 13.5 in (343 mm)
    • End 1 inside diameter: 0.75 in (19 mm)
    • End 2 inside diameter: 0.75 in (19 mm)
    • Branch quantity: 0
    • Quick connect fitting quantity: 0

    Build and materials

    • Construction: molded
    • Material: EPDM
    • Condition: New
    • Country of origin: United States

    In the box

    One molded heater hose.

    Installation notes

    • Replace the hose clamps each time a new coolant hose is installed.
    • Do not use this hose for fuel or oil transfer applications.

    Interchange: 16142M · 86128 · D86128 · 25557565 · 25557566 · 96553273 · 4312 · 63046 · 11601 · 1785685Z00

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    16142M, 19601, 86128, D86128, 25557565, 25557566, 96553273, 4312, 63046, 11601, 1785685Z00

    Frequently Asked Questions

    Is this the Suzuki Forenza heater hose for the 2004-2008 model with the 4-cylinder 2.0L engine?

    Yes, Gates 19601 fits the 2004-2008 Suzuki Forenza 4-cylinder 2.0L, one hose per car. If your car is a different model, look for it in the "Vehicles it fits" section.

    Is this a Gates 3/4 inch heater hose?

    Yes. Gates 19601 has a 0.75 in (19 mm) inside diameter at both ends and a centerline length of 13.5 in (343 mm).

    What are the tube and cover of this hose made of?

    The tube and cover are EPDM, with synthetic fiber knit reinforcement. The hose is rated for -40 °F to 275 °F (-40 °C to 135 °C).

    Can this heater hose carry fuel or oil?

    No. This heater hose is for coolant, water and air applications, including marine use, and must not be used for fuel or oil transfer.

    Do I need new clamps when installing this heater hose?

    Yes. The hose clamps should be replaced each time a new coolant hose is installed, rather than reusing the old ones.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review