Heater Hose for 2004-2011 Ford Ranger & More - Gates 22949

$107.99

Vehicles this part fits

    Part number: 22949
    UPC: 072053583021
    Condition: New
    Weight: 1.67 LBS
    Item Package Quantity: 1
    $107.99
    Adding to cart… The item has been added

    Have questions?

    Gates HVAC Heater Hose P/N:22949
    Gates HVAC Heater Hose P/N:22949
    $107.99
    $107.99

    Gates 22949 heater hose for the 2004-2011 Ford Ranger V6 4.0L and other vehicles carries engine coolant between the heater and the pipe. The Gates molded heater hose is a modular assembly with one built-in branch.

    • Materials engineered to resist collapse under vacuum
    • Engineered to resist electrochemical degradation, the leading cause of hose failure
    • EPDM tube with synthetic fiber knit reinforcement and a heat-, ozone- and chemical coolant-resistant EPDM cover
    • Meets SAE 20R3 EC Class D1 under 25 mm (1 in.) ID and SAE 20R4 EC Class D1 for 25 mm (1 in.) ID and over
    • Temperature range of -40°F to +257°F (-40°C to +125°C)

    Quick facts

    • Part: Gates 22949 heater hose
    • Also called: HVAC heater hose
    • Fits: 2004-2011 Ford Ranger V6 4.0L and other vehicles
    • Position: Heater to pipe-2
    • Material: EPDM, plastic
    • Condition: New

    Coolant leaks, a soft or swollen hose, cracks in the cover or weak cabin heat can mean the HVAC heater hose is wearing out. These signs alone do not prove the hose is the problem, since a stuck thermostat can also leave the cabin cold.

    Fits

    This heater hose is listed for a wide range of Ford and Mazda models, including the 2004-2011 Ford Ranger V6 4.0L, the 2004-2005 Ford Explorer V6 4.0L and the 2004-2010 Mazda B4000 V6 4.0L, and each takes one. If your vehicle is not named here, check your year and engine in the "Vehicles it fits" section.

    Specifications

    Fit and size

    • Position: heater to pipe-2
    • Quantity per vehicle: 1
    • Centerline length: 338 mm (13.3 in)
    • End 1 inside diameter: 15 mm (0.61 in)
    • End 2 inside diameter: 15 mm (0.61 in)
    • End 3 inside diameter: 0.245 in
    • Branch quantity: 1

    Build and materials

    • Construction: molded, modular
    • Modular components included: branch
    • Quick-connect fittings: none
    • Contains spring: no
    • Material: EPDM, plastic
    • Condition: New
    • Country of origin: United States

    Installation notes

    • Replace the clamps each time a new coolant hose is installed.
    • Not for fuel or oil transfer applications.

    Interchange: 4L5Z 18472 BD
    22518M · 64351 · E91047 · 9584

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    22518M, 22949, 64351, E91047, 4L5Z 18472 BD, 9584

    Frequently Asked Questions

    Is Gates 22949 a heater hose for the 2004-2011 Ford Ranger V6 4.0L?

    Yes. Gates 22949 is listed for the 2004-2011 Ford Ranger V6 4.0L, and that truck takes one. For a different vehicle, check your year and engine in the "Vehicles it fits" section.

    What size are the ends on this heater hose?

    Both main ends have a 15 mm (0.61 in) inside diameter, and the third end is 0.245 in. Centerline length is 338 mm (13.3 in).

    Is this heater hose rated for engine coolant temperatures?

    Yes. Gates 22949 is rated from -40°F to +257°F (-40°C to +125°C) and has an EPDM tube and cover. It is for coolant only, not fuel or oil transfer.

    How can I tell if this molded heater hose is worn out?

    With the engine off and cool, look for cracks, a swollen or soft cover, or coolant residue at the ends. A shop can pressure-test the cooling system if the cause is unclear.

    Does this heater hose come with a branch or quick connects?

    It includes one branch and no quick-connect fittings, and it has no spring. Gates 22949 is a molded, modular hose.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review