Gates HVAC Heater Hose P/N:23855
Gates 12266 heater hose for the 2001-2003 Lexus RX300 V6 3.0L carries engine coolant through the heater circuit. This Gates molded heater hose, also called an HVAC heater hose, is made for the heater outlet.
A leaking, cracked, soft or swollen hose, coolant loss, or a heater that blows cool air can point to this hose. A leaking heater core, a tired thermostat, a weak water pump or a loose clamp can cause similar signs, so find the cause before buying a replacement.
It is a direct-fit replacement for the 2001-2003 Lexus RX300 V6 3.0L, which takes one.
Fit and size
Build and materials
Interchange: 16742M · F11396 · 13266 · 8724548070
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Gates 12266 heater hose fit the 2001-2003 Lexus RX300 V6 3.0L?
Yes. Gates 12266 is made for the heater outlet on the 2001-2003 Lexus RX300 V6 3.0L.
Is this Gates heater hose approved for marine use?
Yes. The Gates 12266 hose is approved for marine applications and can be used for coolant, water and air. It is not for fuel or oil transfer.
What are the inside diameter and length of this heater hose?
The inside diameter is 1.84 in (47 mm) at both ends, and the centerline length is 31.16 in (791 mm).
Should I reuse the old hose clamps on this heater hose?
No. Replace the hose clamps each time a new coolant hose is installed.
How can I tell if this EPDM heater hose is wearing out?
With the engine off and cool, look for cracks, swelling, soft spots or coolant seepage along the hose. Coolant loss or cool heater air can have other causes, so a shop can test the system.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.