Gates HVAC Heater Hose P/N:19032
The Gates 12384 heater hose for the 2009-2010 Dodge Journey 3.5L carries engine coolant between the engine and the heater core so the cabin heater can warm the interior.
Seeping coolant, a cracked or bulging hose, or weak vent heat can mean this heater hose is worn, though a leaking heater core or stuck-open thermostat can be behind them too, so find the cause first.
This Gates HVAC heater hose is a direct fit for the 2009-2010 Dodge Journey 3.5L, which takes one in the heater position.
Fit and size
Build and materials
Interchange: F10604 · 13384
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this a radiator hose for the 2009-2010 Dodge Journey 3.5L?
No. Gates 12384 is a heater hose that fits the 2009-2010 Dodge Journey 3.5L in the heater position; radiator hoses are sold separately.
Is this a Gates 3/4 heater hose?
No. Both ends of this heater hose measure 16 mm (.63 in) inside diameter, and its centerline length is 343 mm (13.5 in).
What's inside the wall of this EPDM molded hose?
The Gates 12384 heater hose has an EPDM tube, synthetic fiber knit reinforcement and an EPDM cover, and it meets SAE 20R3 Type EC Class D-1 and D-2 specifications.
How do I check a molded heater hose like this for wear?
With the engine off and cool, look for coolant seepage at the hose ends, cracks in the cover, or a soft, swollen section; each can mean this heater hose is wearing out.
Can the old clamps go back on with the Gates 12384 hose?
No. Fit new hose clamps each time a new coolant hose is installed, and that includes the Gates 12384 heater hose.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.