Gates HVAC Heater Hose P/N:12395

Be the first to review this product

$8.99

MPN: 12395

UPC: 770075848264

Item Package Quantity: 1

Current Stock:

Quantity:

Adding to cart… The item has been added

Have questions?

Ask an Expert

Gates HVAC Heater Hose P/N:12395

$8.99

Description

Route coolant reliably through today's tight engine bays with the GATES heater hose 12395, a factory-molded replacement for the 2012-2015 Honda Civic, 2013 Acura ILX, and 2016 Honda HR-V. This gates molded heater hose is pre-shaped to fit the throttle body outlet, running from the throttle body to pipe-1, so it drops in without awkward bending. See the Buyer's Guide tab to confirm the engine for your vehicle.

OEM-style molded design: factory-molded to suit smaller, tighter-fitting engine compartments; usable for coolant, water and air applications, and also approved for marine use.
Resists electrochemical degradation: engineered to fight electrochemical degradation, a leading cause of hose failure.
EPDM build: an EPDM tube, synthetic fiber knit reinforcement, and an EPDM cover.
Rated to spec: meets SAE 20R3 Type EC Class D-1 and D-2 and handles a temperature range of -40°F to 275°F (-40°C to 135°C).

Gates recommends installing new hose clamps each time a coolant hose is replaced. Do not use this hose for fuel or oil transfer applications.

Interchange: F10610 · 19507R1AA01 · 13395

Manufacturer's Description

Product Specs

Buyer's Guide

Interchange Part Numbers

This part cross-references / interchanges with the following part numbers:

F10610, 19507R1AA01, 12395, 13395

Frequently Asked Questions

What is the GATES hvac heater hose 12395?

It's a factory-molded EPDM heater hose that carries coolant, water or air, engineered to resist electrochemical degradation and cataloged for the throttle body outlet, throttle body to pipe-1 position.

What vehicles does the 12395 fit?

The 2012-2015 Honda Civic, the 2013 Acura ILX, and the 2016 Honda HR-V. Check the Buyer's Guide tab to confirm the engine for your specific vehicle.

What is this heater hose made of?

It uses an EPDM tube, synthetic fiber knit reinforcement, and an EPDM cover, and it meets SAE 20R3 Type EC Class D-1 and D-2 specifications.

Can I use this hose for fuel or oil?

No. Gates cautions against using it for fuel or oil transfer. It is intended for coolant, water and air, and is also approved for marine applications.

Do I need new hose clamps when installing it?

Gates recommends installing new hose clamps each time a coolant hose is replaced for a secure, leak-free connection.