Gates 12428 heater hose for the 2015-2016 Kia Soul 4-cylinder 1.6L and other vehicles carries engine coolant at the throttle body inlet. This Gates molded heater hose, also called an HVAC heater hose, is also approved for marine applications.
- Gates Small I.D. Molded Coolant Hose line, factory-molded for today's smaller, tighter-fitting engine compartments
- Suitable for coolant, water and air applications
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- EPDM tube and cover with synthetic fiber knit reinforcement
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature range of -40 °F to 275 °F (-40 °C to 135 °C)
Quick facts
- Part: Gates 12428 heater hose
- Also called: HVAC heater hose
- Fits: 2015-2016 Kia Soul 4-cylinder 1.6L and other vehicles
- Position: Throttle body inlet
- Material: EPDM
- Condition: New
Coolant drips near the hose, a swollen, soft or cracked cover, or a coolant level that keeps dropping can mean the hose is wearing out; check the level only with the engine cool. These signs alone do not prove the hose is at fault, since a loose clamp can leak the same way.
Fits
This hose is listed for a wide range of Kia, Hyundai and Dodge models, such as the 2016-2018 Kia Rio 4-cylinder 1.6L and the 2012-2018 Hyundai Accent 4-cylinder 1.6L. The 2016-2018 Kia Rio 4-cylinder 1.6L takes one hose. To see whether your own car is covered, look it up in the "Vehicles it fits" section.
Specifications
Fit and size
- Position: Throttle body inlet
- Quantity per vehicle: 1
- Centerline length: 11.8 in (300 mm)
- Inside diameter, both ends: 0.38 in (10 mm)
Build and materials
- Material: EPDM
- Construction: Molded
- Condition: New
- Country of origin: United States
Installation notes
- Replace the hose clamps each time a new coolant hose is installed.
- Do not use this hose for fuel or oil transfer applications.
Interchange: F11912 · 254682B600 · 13428
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
F11912, 254682B600, 12428, 13428
Frequently Asked Questions
Is the Gates 12428 heater hose right for the 2015-2016 Kia Soul 4-cylinder 1.6L?
Yes. Gates 12428 is listed for the 2015-2016 Kia Soul 4-cylinder 1.6L, which takes one. For other cars, look in the "Vehicles it fits" section.
What is the Gates 12428 heater hose made of?
Gates 12428 has an EPDM tube, synthetic fiber knit reinforcement and an EPDM cover.
How long is this heater hose and what is its inside diameter?
The hose is 11.8 in (300 mm) along its centerline, with a 0.38 in (10 mm) inside diameter at both ends.
Can I use this molded hose for fuel or oil lines?
No. It is meant for coolant, water and air applications, and it should not be used for fuel or oil transfer.
Do I need new clamps when I put on this heater hose?
Yes, plan on new hose clamps. They should be replaced each time a new coolant hose is installed.
