Gates HVAC Heater Hose P/N:12433

Be the first to review this product

$8.99

MPN: 12433

UPC: 770075821328

Item Package Quantity: 1

Current Stock:

Quantity:

Adding to cart… The item has been added

Have questions?

Ask an Expert

Gates HVAC Heater Hose P/N:12433

$8.99

Description

Keep coolant flowing with the GATES heater hose 12433, a ThermalPro Premium Molded Heater Hose that installs as a direct-fit replacement for the 2017-2021 Chevrolet Bolt and the 2017-2019 and 2021 Chevrolet Bolt EV. This factory-molded, OEM-style hose is cataloged for the battery-cooler-to-reservoir position and is shaped to fit today's smaller, tighter-fitting engine compartments.

Molded construction: EPDM tube, synthetic fiber knit reinforcement, and an EPDM cover — a GATES molded heater hose built to specifications similar to OEM.
Electrochemical degradation resistance: engineered to resist electrochemical degradation, the leading cause of hose failure.
Broad approvals: can be used for coolant, water, and air applications, and is also approved for marine use.
Rated: meets SAE 20R3 Type EC Class D-1 and D-2, with a temperature range of -40°F to 275°F (-40°C to 135°C).

As with any GATES hvac heater hose, do not use it for fuel or oil transfer applications. Gates recommends replacing the hose clamps each time a new coolant hose is installed.

Interchange: F11913 · 42492231 · 13433

Manufacturer's Description

Product Specs

Buyer's Guide

Interchange Part Numbers

This part cross-references / interchanges with the following part numbers:

F11913, 42492231, 12433, 13433

Frequently Asked Questions

What vehicles does the GATES 12433 heater hose fit?

It is a direct-fit replacement for the 2017-2021 Chevrolet Bolt and the 2017-2019 and 2021 Chevrolet Bolt EV. Check the Buyer's Guide tab to confirm the exact application for your vehicle.

Where does this hose route on the vehicle?

It is cataloged for the battery-cooler-to-reservoir position. Confirm the routing against your vehicle's service information before ordering.

What is this GATES molded heater hose made of?

It uses an EPDM tube, synthetic fiber knit reinforcement, and an EPDM cover, and is engineered to resist electrochemical degradation, a leading cause of hose failure.

Can I use this hose for fuel or oil?

No. Gates cautions against using it for fuel or oil transfer applications. It is intended for coolant, water, and air applications, and is also approved for marine use.

Do I need new hose clamps when installing it?

Gates recommends replacing the hose clamps each time a new coolant hose is installed. Clamps are not stated as included with this hose.