Heater Hose for 2011-2016 Chevrolet Cruze & More - Gates 12465

$35.99

Part number: 12465

UPC: 770075865469

Condition: New

Weight: 0.92 LBS

Item Package Quantity: 1

$35.99

Current Stock: 115

Quantity:

Adding to cart… The item has been added

Have questions?

Ask an Expert

Gates HVAC Heater Hose P/N:12465

$35.99

Description

Keep coolant flowing between the reservoir and the engine with the Gates Heater Hose 12465, a factory-molded, OEM-style GATES heater hose that installs in the reservoir-to-engine position on the 2011-2016 Chevrolet Cruze, the 2016 Chevrolet Cruze Limited, and the 2016 Chevrolet Cruze NG. This GATES molded heater hose is pre-shaped to fit today's smaller, tighter-fitting engine compartments.

Construction: EPDM tube, synthetic fiber knit reinforcement, and EPDM cover.
Failure resistance: engineered to resist electrochemical degradation, a leading cause of hose failure.
Standards: meets SAE 20R3 Type EC Class D-1 and D-2 specifications.
Temperature range: -40°F to 275°F (-40°C to 135°C); approved for coolant, water, air, and marine applications. Do not use for fuel or oil transfer.

Gates recommends installing new hose clamps each time a coolant hose is replaced. Common signs the original may need replacing include coolant seepage, cracking, or a soft, swollen hose section.

Interchange: 626-609
626609 · F10629 · 13251447 · 13408385 · 13465 · R18533

Manufacturer's description

Product specs

Vehicles it fits

Interchange numbers

This part cross-references / interchanges with the following part numbers:

626-609, F10629, 13251447, 13408385, 12465, 13465, R18533

Buyer's Q&A

Frequently Asked Questions

Where does this hose install?

It is cataloged for the reservoir-to-engine position, routing coolant between the reservoir and the engine on the listed applications.

Is this a GATES hvac heater hose?

Yes. It is a factory-molded heater hose for the coolant/HVAC circuit and can be used for coolant, water, or air applications, but not for fuel or oil transfer.

What is this hose made of?

It uses an EPDM tube, synthetic fiber knit reinforcement, and an EPDM cover, and it meets SAE 20R3 Type EC Class D-1 and D-2 specifications.

What temperature range can it handle?

It is rated for -40°F to 275°F (-40°C to 135°C) and is engineered to resist electrochemical degradation, a leading cause of hose failure.

Should I replace the hose clamps too?

Gates recommends installing new hose clamps each time a coolant hose is replaced.