Heater Hose for 2013-2018 Nissan Sentra - Gates 12500

$36.99

Vehicles this part fits

    Part number: 12500
    UPC: 770075855507
    Condition: New
    Weight: 1.94 LBS
    Item Package Quantity: 1
    $36.99
    Adding to cart… The item has been added

    Have questions?

    Gates HVAC Heater Hose P/N:12500
    Gates HVAC Heater Hose P/N:12500
    $36.99
    $36.99

    Gates 12500 heater hose for the 2013-2018 Nissan Sentra 4-cylinder 1.8L carries hot engine coolant through the heating circuit. This Gates molded heater hose is factory-molded, OEM-style hose made to fit today's smaller, tighter engine compartments.

    • Part of the Gates Small I.D. Molded Coolant Hose line
    • Approved for coolant, water and air applications, and for marine use
    • Engineered to resist electrochemical degradation, the leading cause of hose failure
    • EPDM tube, synthetic fiber knit reinforcement and EPDM cover
    • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
    • Temperature range of -40 °F to 275 °F (-40 °C to 135 °C)

    Quick facts

    • Part: Gates 12500 heater hose
    • Also called: HVAC heater hose
    • Fits: 2013-2018 Nissan Sentra 4-cylinder 1.8L
    • Position: Thermo valve to engine, water pump to thermostat
    • Material: EPDM
    • Condition: New

    Seepage, cracking or a swollen hose can mean it is worn, but a failing thermostat or water pump can also be behind a coolant leak or poor cabin heat, so find the cause before you replace it.

    Fits

    The 2013-2018 Nissan Sentra 4-cylinder 1.8L takes one of these hoses, and its position is thermo valve to engine, water pump to thermostat.

    Specifications

    Fit and size

    • Position: thermo valve to engine, water pump to thermostat
    • Quantity per vehicle: 1
    • Centerline length: 20 in (508 mm)
    • Inside diameter, both ends: 0.47 in (10 mm)
    • Branch quantity: 0

    Build and materials

    • Construction: molded
    • Material: EPDM
    • Reinforcement: synthetic fiber knit
    • Condition: new
    • Country of origin: United States

    Installation notes

    • Replace the hose clamps each time a new coolant hose is installed.
    • Do not use this hose for fuel or oil transfer.

    Interchange: 213063RC1A · F10653 · 13500

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    213063RC1A, F10653, 13500

    Frequently Asked Questions

    Is this the right heater hose for the 2013-2018 Nissan Sentra 4-cylinder 1.8L?

    Yes, Gates 12500 fits the 2013-2018 Nissan Sentra 4-cylinder 1.8L, takes one per car, and runs from the thermo valve to the engine and from the water pump to the thermostat.

    What size is the Gates 12500 heater hose?

    The Gates 12500 has a centerline length of 20 in (508 mm) and a 0.47 in (10 mm) inside diameter at both ends. The tube and cover are EPDM over synthetic fiber knit reinforcement.

    What temperature range does this EPDM heater hose handle?

    This hose is rated from -40 °F to 275 °F (-40 °C to 135 °C). It meets SAE 20R3 Type EC Class D-1 and D-2 specifications.

    Is the Gates 12500 HVAC heater hose approved for marine use?

    Yes, this hose is approved for marine applications as well as coolant, water and air, but not for fuel or oil transfer.

    Should I replace the hose clamps when I install this heater hose?

    Yes. Replace the hose clamps each time a new coolant hose goes on.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review