Gates HVAC Heater Hose P/N:12525

Be the first to review this product

$15.99

MPN: 12525

UPC: 770075863229

Item Package Quantity: 1

Current Stock:

Quantity:

Adding to cart… The item has been added

Have questions?

Ask an Expert

Gates HVAC Heater Hose P/N:12525

$15.99

Description

Keep coolant flowing to the heater core and back with the GATES heater hose 12525, a factory-molded replacement that drops into the 2017-2019 Ford Escape. This small I.D. molded coolant hose is built in an OEM-style shape to route cleanly through today's smaller, tighter engine compartments, carrying coolant, water, or air between the engine and the cabin heating circuit.

Molded, OE-style construction: a pre-formed bend built with the quality features of Gates molded coolant hose and similar to OEM specifications, so this hvac heater hose follows the factory routing.
EPDM build: EPDM tube, synthetic fiber knit reinforcement, and an EPDM cover.
Resists electrochemical degradation: engineered to fight ECD, the leading cause of hose failure.
Rated for service: meets SAE 20R3 Type EC Class D-1 and D-2 specifications, with a temperature range of -40°F to 275°F (-40°C to 135°C). Also approved for marine applications.

As a molded heater hose, it installs in the listed application; Gates recommends replacing the hose clamps whenever a new coolant hose is fitted. Do not use for fuel or oil transfer. See the Buyer's Guide tab for engine-level fitment.

Interchange: GV6Z 6B851 A
GV6Z6B851A · F10671 · 13525

Manufacturer's Description

Product Specs

Buyer's Guide

Interchange Part Numbers

This part cross-references / interchanges with the following part numbers:

F10671, GV6Z 6B851 A, 12525, 13525

Frequently Asked Questions

What vehicle does the GATES 12525 hvac heater hose fit?

It is cataloged for the 2017-2019 Ford Escape. Check the Buyer's Guide tab to confirm engine-level fitment for your vehicle.

What is this heater hose made of?

It uses an EPDM tube, synthetic fiber knit reinforcement, and an EPDM cover, and is engineered to resist electrochemical degradation, a leading cause of hose failure.

What specifications and temperature range does it meet?

It meets SAE 20R3 Type EC Class D-1 and D-2 specifications and is rated for -40°F to 275°F (-40°C to 135°C).

Can I use this hose for fuel or oil?

No. Gates cautions against using it for fuel or oil transfer. It is intended for coolant, water, and air applications, and is also approved for marine use.

Do I need new hose clamps when installing it?

Gates recommends replacing the hose clamps each time a new coolant hose is installed, so plan to have fresh clamps on hand for the job.